| Mic Input: Connector |
Female XLR Pin 2 Hot |
| Mic Input: Type |
Electronically balanced/unbalanced |
| Mic Input: Impedance |
330 ohm |
| Mic Input: Max Input Level |
-9 dBu or +11 dBu with 20 dB pad engaged |
| Mic Input: CMRR |
>40dB, Typically 55dB |
| Mic Input: Equivalent Input Noise |
Typically 120 dBu with a 150 ohm, source load 20 Hz to 20kHz Bu |
| Line Input: Connector |
TRS 1/4" Jack |
| Line Input: Type |
Electronically balanced/unbalanced |
| Line Input: Impedance |
20k ohm unbalanced, 40k ohm balanced |
| Line Input: Max Input Level |
+21dBu balanced or unbalanced |
| Line Input: CMRR |
>40dB, Typically 55dB |
| Line Input: Gain (Drive Control) |
-15dB to +15dB |
| Instrument Input: Connector |
TS 1/4" Jack |
| Instrument Input: Type |
Unbalanced |
| Instrument Input: Impedance |
470k ohm 100 ohm, send -20 ohm return |
| Instrument Input: Maximum Output Level |
>+21 dBu unbalanced |
| Instrument Input: Insert Connector |
TRS 1/4" |
| Analog Outputs: Connector |
Male XLR Pin 2 Hot and TRS 1/4" |
| Analog Outputs: Type |
Servo-balanced/unbalanced |
| Analog Outputs: Impedance |
Balanced 120 ohm, unbalanced 60 ohm |
| Analog Outputs: Maximum Output Level |
>+21 dBu, >+20 dBm (into a 600 ohm load) |
| Digital Outputs: Connector |
XLR for AES/EBU RCA for S/PDIF |
| Digital Outputs: Impedance |
110 ohm for AES/EBU 75 ohm for S/PDIF |
| Word Sync Input/Output: Connectors |
BNC |
| Word Sync Input/Output: Input Impedance |
75 ohm terminated by internal jumper |
| Word Sync Input/Out: Input |
96, 88.2, 48, or 44.1kHz word clock |
| Word Sync Input/Out: Output |
96, 88.2, 48, or 44.1kHz word clock |
| Drive Control Range |
+30dB to +60dB for Mic Input -15dB to +15dB for Line and Instrument Inputs |
| LEVEL Control Range (Analog and Digital) |
-15dB to +15dB |
| Line |
Selects between microphone and line inputs |
| Phantom Power |
+48V |
| PAD |
20dB pad |
| Phase |
Reverses pins 2 and 3 of the microphone input XLR |
| Low cut |
75Hz, 12dB/octave high pass filter |
| System Performance: Frequency Response |
<10Hz to 75kHz |
| THD + Noise |
0.35% typical at +4dBu out, 1kHz, 40 dB gain |
| Interchannel Crosstalk |
Typically -80dB, 20Hz to 20kHz |
| Analog to Digital: Type |
dbx Type IV A/D Conversion System |
| Analog to Digital: Sample Rate |
96, 88.2, 48, or 44.1kHz selectable |
| Analog to Digital: Wordlength |
24, 20, or 16 bit selectable |
| Analog to Digital: Dither Type |
TPDF, SNR2, or none |
| Analog to Digital: Noise Shape |
Shape 1, Shape 2, or none |
| Analog to Digital: Output Format |
S/PDIF or AES/EBU |
| Analog to Digital: Dynamic Range |
107dB typical, A-weighted, 22kHz bandwidth |
| Operating Voltage |
DO: 120VAC 60Hz, 100VAC 50/60Hz EU: 230VAC 50/60 Hz |
| Power consumption |
35W |
| Dimensions (H x D x W) |
1.75" x 7.75" x 19" (4.5cm x 19.7cm x 48.5cm) |
| Weight |
6.89 lbs (3.17kg) |