The Atlona AT-HD-V14 HDMI Distribution Amplifier (HDMI 1.3) with 3D Support (1x4) is a professional 1 input and 4 output splitter for duplicating a HDMI signal across 4 outputs. Supporting Deep Color video up to 12bit, it allows transmission of video resolutions of up to WUXGA or 1080p at (24/50/60 Hz). Using an HDMI cable, the distribution amplifier can transmit 1080p signals up to 50' (15 m) without loss of signal strength. It also supports a DVI source and display when used with a HDMI to/from DVI adaptor cable.
Offering support for Dolby Digital, DTS digital audio transmission with 32-192 kHz Fs sample rates, the HDMI Distribution Amplifier (V1.3) supports high definition audio-Dolby Digital TrueHD and DTS-HD audio formats. Utilizing a HDCP key set, it enables independent control over both outputs when connected to an HDMI display. Equipped with a EDID learner, the amplifier detects all the connected HDMI monitors and analyzes its EDID content. The EDID with minimal resolution support acts as a reference EDID for the incoming HDMI sources. In addition, it is compliant with HDMI 1.3, HDCP1.1 and DVI 1.0 standards and also supports 3D video content.