Audio-Technica U853PMW Cardioid Condenser Hanging Microphone, White

Why Adorama?
Easy Returns, Fast Shipping, Trusted for over 35 years.

Need help? Call 800-223-2500

$299.00 List Price

Our Price

$209.00 $9 per week
Free Expedited Shipping
Add to Wishlist

Protect your investment

About the Audio-Technica U853PMW

Designed for permanent installation, the Audio-Technica U853PMW cardioid condenser hanging microphone (White) comes equipped with a wall/ceiling plate power module. The phantom-powered microphone features UniGuard innovations that offer unsurpassed immunity from radio frequency interference. It accepts interchangeable elements available in cardioid polar patterns. Its 80 Hz low-cut UniSteep filter reduces pickup of low-frequency ambient noise.

Audio-Technica U853PMW Includes

  • Audio-Technica U853PMW Cardioid Condenser Hanging Microphone
  • AT8153 Two-Stage Foam Windscreen
  • AT8451 Steel Hanger
  • AT8534 Wall/Ceiling Plate Power Module
  • AT8438 5/8"-27 Stand Adapter
  • Audio-Technica 2 Years Limited Warranty

Audio-Technica U853PMW Features

  • Designed for suspension over choirs, instrumental groups and theater stages
  • Wall/ceiling plate power module permits permanent installation in standard metal U.S. single gang electrical box
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Accepts interchangeable elements to permit angle of acceptance from 90deg. to 360deg
  • Low-profile design with low-reflectance finish for minimum visibility

Audio-Technica U853PMW Specifications

Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 30-20,000 Hz
Low Frequency Roll-Off 80 Hz, 18 dB/octave
Open Circuit Sensitivity -39 dB (11.2 mV) re 1V at 1 Pa
Impedance 200 ohms
Maximum Input Sound Level 128 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range (typical) 102 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 68 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 4 mA typical
Switch Flat, roll-off; 0 dB/+10 dB gain setting
Output Connector (Power Module) Integral 3-pin XLRM-type
Cable Length 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
Dimensions Module: 2.80x4.55x1.42" / 7.11x11.55x3.60 cm
Microphone: 1.34x0.48" / 3.40x1.21 cm
Weight Power Module: 3.4 oz / 96.38 g
Microphone: 0.5 oz / 14.17 g
Feedback is top rated for customer service HACKER SAFE certified sites prevent over 99.9% of hacker crime. BBB Accredited Business