Aviom 16x16 Digital Snake System with 16 Mic/Line Inputs and 16 Analog Returns

Aviom

List Price: $6,984.00

Free 3 Day Shipping

See all shipping options

In Stock Online - Usually ships within 1-2 Days learn more

17% Off

Our Price

$5,775.00
Buy more and save
Quantity Discount
QuantityAmount

The quantity discount will be reflected in your shopping cart

About Aviom

The Aviom DS16 is a 16x16 digital snake system ideal for smaller ensembles. The system uses one AN-16/i-M on the stage side that can accept up to 16 mic/line inputs. At front of house, those signals are to your console via an AN-16/o v.4 Output Module. Returns are handled by an AN-16/i at FOH and a second AN-16/o v.4 on stage. All 32 channels are transmitted over a single Cat-5e cable.

Each input channel on the AN-16/i-M contains a three-segment level meter, a continuously variable gain knob, a phase reverse switch, 48-volt phantom power and a rumble filter with an 85Hz roll off. The 16 balanced outputs on the AN-16/o v.4 are provided via DB25 multipin connectors. The analog outputs can be set (per channel pair) to +24dBu, +18dBu, +4dBu, or mic level.

Aviom Specifications

AN-16/i-M: Audio Inputs
16, balanced mic- or line-level, XLR combo connector
AN-16/i-M: XLR Input (mic/line)
Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio -
AN-16/i-M: TRS Line Inputs & Send/Return
Tip: Audio +; Ring: Audio -; Sleeve: Ground
AN-16/i-M: Audio Thru
XLR; Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio -
Direct coupled passive throughput
AN-16/i-M: Insert Send
Impedance balanced; Nominal level: 0dBu; Peak
Level (A/D clip point): +14dBu
AN-16/i-M: Insert Return
TRS balanced; Nominal level: 0dBu; Peak Level
(A/D clip point): +14dBu
AN-16/i-M: Analog to Digital Conversion
48kHz sample rate, 24 bit
AN-16/i-M: Operating Level
+4dBu
AN-16/i-M: Frequency Response
4Hz-22kHz
AN-16/i-M: A-Net Output
one Category 5 (RJ45 connector)
AN-16/i-M: A-Net Expansion
one Category 5 (RJ45 connector)
AN-16/i-M: Gain Range
Mic: +6dB to +60dB; Line: -15dB to +36dB
AN-16/i-M: Channel LED Indicators
Signal Present and Clip, per channel
AN-16/i-M: Line Inputs
Impedance: 48k ohms
AN-16/i-M: Metering
LEDs; green: Signal Present, red: Clip; per channel
AN-16/i-M: Stereo Operation
Stereo Link, per channel pair;
Two-position switch (Normal, Link)
AN-16/i-M: Maximum Input Level
Mic: +14dBu; Line: +28dBu
AN-16/i-M: Input Impedance
Mic: 2.4k ohms; Line (TRS): 33k ohms;
Insert Return: 39k ohms
AN-16/i-M: A/D Frequency Response
-0.1dB @ 20kHz (-0.4dB @ 20.0kHz, measured from Mic or Line in)
-3dB @ 1.5Hz (-3dB @ 2.0Hz, measured from Micro Line in)
AN-16/i-M: THD +N
< 0.003%
AN-16/i-M: Crosstalk
-90dB
AN-16/i-M: Bit Error Rate (BER)
10-12
AN-16/i-M: Signal to Noise (unweighted)
A/D: -105dB Reference = +14dBu (A/D clip point)Send jack: -113dB (Gain = minimum)
AN-16/i-M: EIN (Equivalent Input Noise)
-128dBu
(Rs = 150 ohms, 20kHz BW, Gain = +60dB)
AN-16/i-M: CMRR
80dB @ 120Hz (Gain = +60dB)
AN-16/i-M: Low Cut Filter
-3dB @ 85Hz, -18 dB per octave
AN-16/i-M: Phantom Power
+48 volts, per channel, switch with LED
AN-16/i-M: Digital Outputs
A-Net: 2 (Main and Aux); A-Net Expansion: 1
AN-16/i-M: Pro16 A-Net
A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable
uses unshielded Cat-5e UTP (or better) cable
AN-16/i-M: Latency
<0.880 msec (measured from analog input to analog output)
AN-16/i-M: Power Supply
Internal, universal switching type; IEC jack
AN-16/i-M: Voltage
100-240VAC, 50-60Hz, 60W; Fuse: 250VAC, F4AL
AN-16/i: Audio Inputs
16, balanced line-level, 1/4-inch TRS connector
AN-16/i: Inputs
Tip: Audio +; Ring: Audio -; Sleeve: Ground
AN-16/i: TRS Thru
Impedance matched output
AN-16/i: Analog to Digital Conversion
48kHz sample rate, 24 bit
AN-16/i: Frequency Response
4Hz-22kHz
AN-16/i: A-Net Output
one Category 5 (RJ45 connector)
AN-16/i: A-Net Expansion
one Category 5 (RJ45 connector)
AN-16/i: Gain Settings
Four-position switch, -10dBv, 0dBu, +4dBu and +22dBu
AN-16/i: Channel LED Indicators
Signal Present and Clip, per channel
AN-16/i: Line Inputs
Impedance: 48k ohms
AN-16/i: Metering
LEDs; green: Signal Present, red: Clip; per channel
AN-16/i: Stereo Operation
Stereo Link, per channel pair;
Two-position switch (Normal, Link)
AN-16/i: Maximum Input Level
+22dBu
AN-16/i: Input Impedance
17.8k ohm
AN-16/i: Freq. Response
4Hz-22kHz +0.2dB/-3dB
AN-16/i: THD +N
< 0.003%
AN-16/i: Crosstalk
-90dB
AN-16/i: Bit Error Rate (BER)
10-12
AN-16/i: Signal to Noise (unweighted)
90dB typical, A/D to D/A
Measured from AN-16/i to AN-16/o Output Module
AN-16/i: Digital Outputs
A-Net: 1; A-Net Expansion: 1; RJ45 connector
AN-16/i: A-Net Pro16
A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable;
use unshielded Cat-5e UTP (or better) cable
AN-16/i: Latency
<0.880 msec (measured from analog input to analog output)
AN-16/i: Power Supply
External, DC, universal switching type
AN-16/i: Input Voltage
100-240 volts, 50/60Hz, 30VA
AN-16/i: Output Voltage
18-24 VDC, 0.5 amp
AN-16/i: Plug Size
2 mm
AN-16/i: Power
18-24 VDC, 500mA
AN-16/o v.4: Audio Outputs
16 channels, balanced
AN-16/o v.4: Outputs
DB25 multipin connectors (2); Tascam analog audio pinout
Impedance balanced output for mic, +4dBu and +18dBu; differential output for +24dBu
AN-16/o v.4: D/A Conversion
48kHz sample rate, 24 bit
AN-16/o v.4: Frequency Response
4Hz-22kHz
AN-16/o v.4: A-Net Input/Output
one EtherCon Category 5 (RJ45 connector)
AN-16/o v.4: A-Net Expansion
one EtherCon Category 5 (RJ45 connector)
AN-16/o v.4: Output Level Settings
Four-position switch, per channel pair; +24dBu, +18dBu, +4dBu and Mic
AN-16/o v.4: Channel LED Indicators
Signal Present and Clip, per channel
AN-16/o v.4: Metering
LEDs; green: Signal Present; red: Clip; per channel
AN-16/o v.4: Maximum Output Level
+24dBu
AN-16/o v.4: Output Impedance
226 ohms (+18dBu, +24dBu); 100 ohms (+4dBu and mic)
AN-16/o v.4: Freq. Response
4Hz-22kHz +0.2dB/-3dB
AN-16/o v.4: THD +N
< 0.004%
AN-16/o v.4: Crosstalk
-90dB
AN-16/o v.4: Bit Error Rate (BER)
10-12
AN-16/o v.4: Signal to Noise
92dB typical, A/D to D/A
Measured from AN-16/i to AN-16/o v.4 Output Module
AN-16/o v.4: Digital Connections
A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1;
Neutrik EtherCon connectors
AN-16/o v.4: A-Net Pro16
A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable;
uses unshielded Cat-5e UTP (or better) cable
AN-16/o v.4: Latency
<0.620 msec (measured from analog input to analog output)
AN-16/o v.4: Power Supply
External, DC, universal switching type
AN-16/o v.4: Input Voltage
100-240 volts, 50/60Hz, 30VA
AN-16/o v.4: Output Voltage
24 VDC, 0.5 amp
AN-16/o v.4: Plug Size
2 mm
AN-16/o v.4: Power
24 VDC, 500mA
Dimensions
AN-16/i-M: 19 x 9.25 in. (482.6 x 234.95mm); 3U high
AN-16/i: 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
AN-16/o v.4: 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
Weight
AN-16/i-M: 12 lbs (5.44 kg)
AN-16/i: 6.8 lbs. (3.08 kg)
AN-16/o v.4: 6.8 lbs. (3.08 kg)
top
Share this item:
Adorama.com is top rated for customer serviceHACKER SAFE certified sites prevent over 99.9% of hacker crime.