Download our latest NYC retail store ad here for our weekly specials!
Aviom

Aviom DS32 32x16 Pro 16 Digital Snake System, 32Mic/Line Inputs and 16 Line-Level Returns

SKU: AVIDS32 MFR: DS32
Usually ships in 7-10 Business Days.
Your card will only be charged once item ships.
Why Adorama?
Easy Returns, Fast Shipping, Trusted for over 35 years.

Need help? Call 800-223-2500 212-741-0052

$11,654.00 List Price

Our Price

$9,775.00
Free Shipping
Qty:

Add to Wishlist

About the Aviom DS32

The Aviom DS32 Digital Snake provides 32 mic/line inputs on stage and 16 line-level returns from the FOH position. All audio data travels over a single Cat-5e cable (up to 500ft/150m) between stage and FOH by using the included AN-16SBR System Bridges.

Each input channel on the AN-16/i-M contains a three-segment level meter, a continuously variable gain knob, a phase reverse switch, 48-volt phantom power and a rumble filter with an 85Hz roll off. The 16 balanced outputs on the AN-16/o v.4 are provided via DB25 multipin connectors. The analog outputs can be set (per channel pair) to +24dBu, +18dBu, +4dBu, or mic level. The DS32 is an ideal solution for mid-sized ensembles and facilities.

Aviom DS32 Includes

  • Aviom 2 x AN-16/i-M Mic Input Modules
  • AN-16/i Input Module
  • 3 x AN-16/o v.4 Output Modules
  • AN-16SBR System Bridges
  • Aviom Warranty

Aviom DS32 Specifications

AN-16/i-M: Audio Inputs 16, balanced mic- or line-level, XLR combo connector
AN-16/i-M: XLR Input (mic/line) Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio -
AN-16/i-M: TRS Line Inputs & Send/Return Tip: Audio +; Ring: Audio -; Sleeve: Ground
AN-16/i-M: Audio Thru XLR; Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio -
Direct coupled passive throughput
AN-16/i-M: Insert Send Impedance balanced; Nominal level: 0dBu; Peak
Level (A/D clip point): +14dBu
AN-16/i-M: Insert Return TRS balanced; Nominal level: 0dBu; Peak Level
(A/D clip point): +14dBu
AN-16/i-M: Analog to Digital Conversion 48kHz sample rate, 24 bit
AN-16/i-M: Operating Level +4dBu
AN-16/i-M: Frequency Response 4Hz-22kHz
AN-16/i-M: A-Net Output One Category 5 (RJ45 connector)
AN-16/i-M: A-Net Expansion One Category 5 (RJ45 connector)
AN-16/i-M: Gain Range Mic: +6dB to +60dB; Line: -15dB to +36dB
AN-16/i-M: Channel LED Indicators Signal Present and Clip, per channel
AN-16/i-M: Line Inputs Impedance: 48k ohms
AN-16/i-M: Metering LEDs; green: Signal Present, red: Clip; per channel
AN-16/i-M: Stereo Operation Stereo Link, per channel pair;
Two-position switch (Normal, Link)
AN-16/i-M: Maximum Input Level Mic: +14dBu; Line: +28dBu
AN-16/i-M: Input Impedance Mic: 2.4k ohms; Line (TRS): 33k ohms;
Insert Return: 39k ohms
AN-16/i-M: A/D Frequency Response -0.1dB @ 20kHz (-0.4dB @ 20.0kHz, measured from Mic or Line in)
-3dB @ 1.5Hz (-3dB @ 2.0Hz, measured from Micro Line in)
AN-16/i-M: THD +N < 0.003%
AN-16/i-M: Crosstalk -90dB
AN-16/i-M: Bit Error Rate (BER) 10-12
AN-16/i-M: Signal to Noise (unweighted) A/D: -105dB Reference = +14dBu (A/D clip point)Send jack: -113dB (Gain = minimum)
AN-16/i-M: EIN (Equivalent Input Noise) -128dBu
(Rs = 150 ohms, 20kHz BW, Gain = +60dB)
AN-16/i-M: CMRR 80dB @ 120Hz (Gain = +60dB)
AN-16/i-M: Low Cut Filter -3dB @ 85Hz, -18 dB per octave
AN-16/i-M: Phantom Power +48 volts, per channel, switch with LED
AN-16/i-M: Digital Outputs A-Net: 2 (Main and Aux); A-Net Expansion: 1
AN-16/i-M: Pro16 A-Net A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable
uses unshielded Cat-5e UTP (or better) cable
AN-16/i-M: Latency <0.880 msec (measured from analog input to analog output)
AN-16/i-M: Power Supply Internal, universal switching type; IEC jack
AN-16/i: Audio Inputs 16, balanced line-level, 1/4-inch TRS connector
AN-16/i: Inputs Tip: Audio +; Ring: Audio -; Sleeve: Ground
AN-16/i: TRS Thru Impedance matched output
AN-16/i: Analog to Digital Conversion 48kHz sample rate, 24 bit
AN-16/i: Frequency Response 4Hz-22kHz
AN-16/i: A-Net Output One Category 5 (RJ45 connector)
AN-16/i: A-Net Expansion One Category 5 (RJ45 connector)
AN-16/i: Gain Settings Four-position switch, -10dBv, 0dBu, +4dBu and +22dBu
AN-16/i: Channel LED Indicators Signal Present and Clip, per channel
AN-16/i: Line Inputs Impedance: 48k ohms
AN-16/i: Metering LEDs; green: Signal Present, red: Clip; per channel
AN-16/i: Stereo Operation Stereo Link, per channel pair;
Two-position switch (Normal, Link)
AN-16/i: Maximum Input Level +22dBu
AN-16/i: Input Impedance 17.8k ohm
AN-16/i: Freq. Response 4Hz-22kHz +0.2dB/-3dB
AN-16/i: THD +N < 0.003%
AN-16/i: Crosstalk -90dB
AN-16/i: Bit Error Rate (BER) 10-12
AN-16/i: Signal to Noise (unweighted) 90dB typical, A/D to D/A
Measured from AN-16/i to AN-16/o Output Module
AN-16/i: Digital Outputs A-Net: 1; A-Net Expansion: 1; RJ45 connector
AN-16/i: A-Net Pro16 A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable;
use unshielded Cat-5e UTP (or better) cable
AN-16/i: Latency <0.880 msec (measured from analog input to analog output)
AN-16/i: Power Supply External, DC, universal switching type
AN-16/i: Input Voltage 100-240 volts, 50/60Hz, 30VA
AN-16/i: Output Voltage 18-24 VDC, 0.5 amp
AN-16/i: Plug Size 2 mm
AN-16/i: Power 18-24 VDC, 500mA
AN-16/o v.4: Audio Outputs 16 channels, balanced
AN-16/o v.4: Outputs DB25 multipin connectors (2); Tascam analog audio pinout
Impedance balanced output for mic, +4dBu and +18dBu; differential output for +24dBu
AN-16/o v.4: D/A Conversion 48kHz sample rate, 24 bit
AN-16/o v.4: Frequency Response 4Hz-22kHz
AN-16/o v.4: A-Net Input/Output One EtherCon Category 5 (RJ45 connector)
AN-16/o v.4: A-Net Expansion One EtherCon Category 5 (RJ45 connector)
AN-16/o v.4: Output Level Settings Four-position switch, per channel pair; +24dBu, +18dBu, +4dBu and Mic
AN-16/o v.4: Channel LED Indicators Signal Present and Clip, per channel
AN-16/o v.4: Metering LEDs; green: Signal Present; red: Clip; per channel
AN-16/o v.4: Maximum Output Level +24dBu
AN-16/o v.4: Output Impedance 226 ohms (+18dBu, +24dBu); 100 ohms (+4dBu and mic)
AN-16/o v.4: Freq. Response 4Hz-22kHz +0.2dB/-3dB
AN-16/o v.4: THD +N < 0.004%
AN-16/o v.4: Crosstalk -90dB
AN-16/o v.4: Bit Error Rate (BER) 10-12
AN-16/o v.4: Signal to Noise 92dB typical, A/D to D/A
Measured from AN-16/i to AN-16/o v.4 Output Module
AN-16/o v.4: Digital Connections A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1;
Neutrik EtherCon connectors
AN-16/o v.4: A-Net Pro16 A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable;
uses unshielded Cat-5e UTP (or better) cable
AN-16/o v.4: Latency <0.620 msec (measured from analog input to analog output)
AN-16/o v.4: Power Supply External, DC, universal switching type
AN-16/o v.4: Input Voltage 100-240 volts, 50/60Hz, 30VA
AN-16/o v.4: Output Voltage 24 VDC, 0.5 amp
AN-16/o v.4: Plug Size 2 mm
AN-16/o v.4: Power 24 VDC, 500mA
AN-16SBR: A-Net Input/Output Four EtherCon RJ45 Connectors
AN-16SBR: A-Net Bridge: One EtherCon RJ45 Connector
Dimensions AN-16/i-M: 19 x 9.25 in. (482.6 x 234.95mm); 3U high
AN-16/i: 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
AN-16/o v.4: 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
AN-16SBR: 1U high x 19" (482.6mm) wide x 1.25" (31.75mm) deep
Weight AN-16/i-M: 12 lbs(5.44 kg)
AN-16/i: 6.8 lbs. (3.08 kg)
AN-16/o v.4: 6.8 lbs. (3.08 kg)
AN-16SBR: 1.0 lbs (0.45 kg)
Feedback
Adorama.com is top rated for customer service HACKER SAFE certified sites prevent over 99.9% of hacker crime. BBB Accredited Business