Download our latest NYC retail store ad here for our weekly specials!
Aviom

Aviom DS32Mix 32x16 Pro16 Digital Snake with Personal Mixing System

SKU: AVIDS32MIX MFR: DS32MIX
Usually ships in 7-10 Business Days.
Your card will only be charged once item ships.
Why Adorama?
Easy Returns, Fast Shipping, Trusted for over 35 years.

Need help? Call 800-223-2500 212-741-0052

$16,909.00 List Price

Our Price

$14,150.00
Free Expedited Shipping
Free Shipping
Qty:
Add to Wishlist

About the Aviom DS32Mix

The Aviom DS32Mix uses the same snake components as the DS32 Digital Snake and supports up to 32 mic/line inputs on stage and 16 returns. It also integrates a starter Pro16 personal mixing system providing 16 channels of monitoring content for four monitoring positions. Each input channel on the AN-16/i-M contains a three-segment level meter, a continuously variable gain knob, a phase reverse switch, 48-volt phantom power and a rumble filter with an 85Hz roll off.

The 16 balanced outputs on the AN-16/o v.4 are provided via DB25 multipin connectors. The analog outputs can be set (per channel pair) to +24dBu, +18dBu, +4dBu, or mic level. The four included A-16II Personal Mixers give each performer control over channel volume, grouping, pan, stereo spread and master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.

The A-16D Pro A-Net Distributor simplifies monitor system setup, providing both A-Net data and DC power to each connected Personal Mixer. Each A-16D Pro supports up to eight Personal Mixers and additional Personal Mixers can be connected by daisy chaining (with power supplied locally) or with additional A-Net Distributors. All audio for the 32x16 digital snake, plus the 16-channels of monitoring content, travels over a single Cat-5e cable that can be up to 500ft./150m long.

Aviom DS32Mix Includes

  • Aviom 2 x AN-16/i-M Mic Input Modules
  • 2 x AN-16/i Input Modules
  • 3 x AN-16/o v.4 Output Modules
  • AN-16SBR System Bridges(1 Pair)
  • A-16D Pro A-Net Distributor
  • 4 x A-16II Personal Mixers
  • Aviom Warranty

Aviom DS32Mix Specifications

AN-16/i-M: Audio Inputs 16, balanced mic- or line-level, XLR combo connector
AN-16/i-M: XLR Input (mic/line) Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio -
AN-16/i-M: TRS Line Inputs & Send/Return Tip: Audio +; Ring: Audio -; Sleeve: Ground
AN-16/i-M: Audio Thru XLR; Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio - Direct coupled passive throughput
AN-16/i-M: Insert Send Impedance balanced; Nominal level: 0dBu; Peak
Level (A/D clip point): +14dBu
AN-16/i-M:Insert Return TRS balanced; Nominal level: 0dBu; Peak Level (A/D clip point): +14dBu
AN-16/i-M: Analog to Digital Conversion 48kHz sample rate, 24 bit
AN-16/i-M: Operating Level +4dBu
AN-16/i-M: Frequency Response 4Hz-22kHz
AN-16/i-M: A-Net Output One Category 5 (RJ45 connector)
AN-16/i-M: A-Net Expansion One Category 5 (RJ45 connector)
AN-16/i-M: Gain Range Mic: +6dB to +60dB; Line: -15dB to +36dB
AN-16/i-M: Channel LED Indicators Signal Present and Clip, per channel
AN-16/i-M: Line Inputs Impedance: 48k ohms
AN-16/i-M: Metering LEDs; green: Signal Present, red: Clip; per channel
AN-16/i-M: Stereo Operation Stereo Link, per channel pair
Two-position switch (Normal, Link)
AN-16/i-M: Maximum Input Level Mic: +14dBu; Line: +28dBu
AN-16/i-M: Input Impedance Mic: 2.4k ohms; Line (TRS): 33k ohms; Insert Return: 39k ohms
AN-16/i-M: A/D Freq. Response -0.1dB @ 20kHz (-0.4dB @ 20.0kHz, measured from Mic or Line in)
-3dB @ 1.5Hz (-3dB @ 2.0Hz, measured from Mic or Line in)
AN-16/i-M: THD +N < 0.003%
AN-16/i-M: Crosstalk -90dB
AN-16/i-M: Bit Error Rate (BER) 10(-12)
AN-16/i-M: Signal to Noise (unweighted) A/D: -105dB Reference = +14dBu (A/D clip point) Send jack: -113dB (Gain = minimum)
AN-16/i-M: EIN (Equivalent Input Noise) -128dBu (Rs = 150 ohms, 20kHz BW, Gain = +60dB)
AN-16/i-M: Common Mode Rejection Ratio CMRR: 80dB @ 120Hz (Gain = +60dB)
AN-16/i-M: Low Cut Filter -3dB @ 85Hz, -18 dB per octave
AN-16/i-M: Phantom Power +48 volts, per channel, switch with LED
AN-16/i-M: Digital Outputs A-Net: 2 (Main and Aux); A-Net Expansion: 1
AN-16/i-M: Pro16 A-Net A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; uses unshielded Cat-5e UTP (or better) cable
AN-16/i-M: Latency <0.880 msec (measured from analog input to analog output)
AN-16/i-M: Power Supply Internal, universal switching type; IEC jack
AN-16/i-M: Voltage 100-240VAC, 50-60Hz, 60W; Fuse: 250VAC, F4AL
AN-16/i: Audio Inputs 16, balanced line-level, 1/4-inch TRS connector
AN-16/i: Inputs Tip: Audio +; Ring: Audio -; Sleeve: Ground
AN-16/i: TRS Thru Impedance matched output
AN-16/i: Analog to Digital Conversion 48kHz sample rate, 24 bit
AN-16/i: Frequency Response 4Hz-22kHz
AN-16/i: A-Net Output one Category 5 (RJ45 connector)
AN-16/i: A-Net Expansion one Category 5 (RJ45 connector)
AN-16/i: Gain Settings Four-position switch, -10dBv, 0dBu, +4dBu and +22dBu
AN-16/i: Channel LED Indicators Signal Present and Clip, per channel
AN-16/i: Line Inputs Impedance: 48k ohms
AN-16/i: Metering LEDs; green: Signal Present, red: Clip; per channel
AN-16/i: Stereo Operation Stereo Link, per channel pair; Two-position switch (Normal, Link)
AN-16/i: Maximum Input Level +22dBu
AN-16/i: Input Impedance 17.8k ohm
AN-16/i: Freq. Response 4Hz-22kHz +0.2dB/-3dB
AN-16/i: THD +N < 0.003%
AN-16/i: Crosstalk -90dB
AN-16/i: Bit Error Rate (BER) 10(-12)
AN-16/i: Signal to Noise (unweighted) 90dB typical, A/D to D/A Measured from AN-16/i to AN-16/o Output Module
AN-16/i: Digital Outputs A-Net: 1; A-Net Expansion: 1; RJ45 connector
AN-16/i: A-Net Pro16 A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; use unshielded Cat-5e UTP (or better) cable
AN-16/i: Latency <0.880 msec (measured from analog input to analog output)
AN-16/i: Power Supply External, DC, universal switching type
AN-16/i: Input Voltage 100-240 volts, 50/60Hz, 30VA
AN-16/i: Output Voltage 18-24 VDC, 0.5 amp
AN-16/i: Plug Size 2 mm
AN-16/i: Power 18-24 VDC, 500mA
AN-16/o v.4: Audio Outputs 16 channels, balanced
AN-16/o v.4: Outputs DB25 multipin connectors (2); Tascam analog audio pinout
Impedance balanced output for mic, +4dBu and +18dBu; differential output for +24dBu
AN-16/o v.4: D/A Conversion 48kHz sample rate, 24 bit
AN-16/o v.4: Frequency Response 4Hz-22kHz
AN-16/o v.4: A-Net Input/Output One EtherCon Category 5 (RJ45 connector)
AN-16/o v.4: A-Net Expansion One EtherCon Category 5 (RJ45 connector)
AN-16/o v.4: Output Level Settings Four-position switch, per channel pair; +24dBu, +18dBu, +4dBu and Mic
AN-16/o v.4: Channel LED Indicators Signal Present and Clip, per channel
AN-16/o v.4: Metering LEDs; green: Signal Present; red: Clip; per channel
AN-16/o v.4: Maximum Output Level +24dBu
AN-16/o v.4: Output Impedance 226 ohms (+18dBu, +24dBu); 100 ohms (+4dBu and mic)
AN-16/o v.4: Freq. Response 4Hz-22kHz +0.2dB/-3dB
AN-16/o v.4: THD +N < 0.004%
AN-16/o v.4: Crosstalk -90dB
AN-16/o v.4: Bit Error Rate (BER) 10(-12)
AN-16/o v.4: Signal to Noise 92dB typical, A/D to D/A Measured from AN-16/i to AN-16/o v.4 Output Module
AN-16/o v.4: Digital Connections A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1; Neutrik EtherCon connectors
AN-16/o v.4: A-Net Pro16 A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; uses unshielded Cat-5e UTP (or better) cable
AN-16/o v.4: Latency <0.620 msec (measured from analog input to analog output)
AN-16/o v.4: Power Supply External, DC, universal switching type
Input Voltage: 100-240 volts, 50/60Hz, 30VA
Output Voltage: 24 VDC, 0.5 amp
Plug Size: 2 mm
AN-16/o v.4: Power 24 VDC, 500mA
AN-16SBR: A-Net Input/Output Four EtherCon RJ45 Connectors
AN-16SBR: A-Net Bridge One EtherCon RJ45 Connector
A-16D Pro: A-Net Input One EtherCon RJ45 connector
A-16D Pro: A-Net Thru One EtherCon RJ45 connector, unpowered
A-16D Pro: A-Net Outputs 8 EtherCon RJ45 connectors, powered (DC)
A-16D Pro: LEDs Power On; A-Net Active
A-16D Pro: Pro16 A-Net 16 channels of digital audio over Cat-5e cable
uses unshielded Cat-5e UTP (or better) cable
A-16D Pro: Power Supply Internal, universal switching type
A-16D Pro: Cooling One ultra-quiet fan
A-16D Pro: Input Voltage 100-240VAC, 50-60Hz, 60W
A-16D Pro: Output Voltage 18-24 VDC, 0.5 amp
transmitted over the Cat-5e cable
A-16II: Audio Output 1/4-inch TRS stereo, headphone or line level
A-16II: Line/Headphone TRS Output Tip: Audio Left; Ring: Audio Right; Sleeve: Ground
Auto-detects mono plugs
A-16II: A-Net Input/Output 1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector)
A-16II: Signal to Noise Ratio (Referenced to 0dB) -103dB
A-16II: Latency <0.880 msec (measured from analog input to analog output)
A-16II: Pro16 A-Net Uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices
A-16II: Power Supply External, DC, universal switching type
Input Voltage: 100-240 volts, 50/60Hz, 30VA
Output Voltage: 18-24 VDC, 0.5 amp
Plug Size: 2 mm
Dimensions (W x D x H) AN-16/i-M: 19 x 9.25" (482.6 x 234.95mm); 3U high
AN-16/i: 19 x 5.75" (482.6 x 146 mm); 1U high
AN-16/o v.4: 19 x 5.75" (482.6 x 146 mm); 1U high
AN-16SBR: 19 x 1.25" (482.6 x 31.75 mm); 1U high
A-16D Pro: 19 x 14.25 x 3.5" (482.6 x 362 x 88.9 mm); 2U high
A-16II: 10.75 x 5.6 x 2.25" (273 x 142.2 x 57.5 mm)
Weight AN-16/i-M: 12lbs (5.4 kg)
AN-16/i: 6.8lbs (3.08 kg)
AN-16/o v.4: 6.8lbs (3.08 kg)
AN-16SBR: 1lbs (0.45 kg)
A-16D Pro: 12lbs (5.44 kg)
A-16II: 3.4lbs (1.54 kg)
Feedback
Adorama.com is top rated for customer service HACKER SAFE certified sites prevent over 99.9% of hacker crime. BBB Accredited Business