Download our latest NYC retail store ad here for savings on your new gear for the new school year!
Aviom

Aviom 48x16 Pro16 Digital Snake System, 48 Mic/Line Inputs and 16 Line-Level Returns

SKU: AVIDS48 MFR: DS48
Usually ships in 7-10 Business Days.
Your card will only be charged once item ships.
Why Adorama?
Easy Returns, Fast Shipping, Trusted for over 35 years.

Need help? Call 800-223-2500 212-741-0052

$15,849.00 List Price

Our Price

$12,950.00
Free Shipping
Qty:

Add to Wishlist

About this item

The Aviom DS48 Digital Snake provides simple digital connectivity between stage and the front of house mix position for up to 48 mic/line inputs and 16 line-level returns. All audio data travels over a single Cat-5e cable between stage and FOH by using the included pair of AN-16SBR System Bridges, simplifying setup and configuration. Cables can be up to 500ft/150m in length.

Each input channel on the AN-16/i-M contains a three-segment level meter, a continuously variable gain knob, a phase reverse switch, 48-volt phantom power and a rumble filter with an 85Hz roll off.

The 16 balanced outputs on the AN-16/o v.4 are provided via DB25 multipin connectors. The analog outputs can be set (per channel pair) to +24dBu, +18dBu, +4dBu, or mic level.

The DS48 can be used with nearly any console and all signals in the system can be split as needed, simply by connecting additional output modules in the split location.

What's Included With This Item

  • Aviom 3 x AN-16/i-M Mic Input Modules
  • AN-16/i Input Module
  • 4 x AN-16/o v.4 Output Modules
  • AN-16SBR System Bridges
  • Aviom Warranty

Technical Specs

AN-16/i-M: Audio Inputs 16, balanced mic- or line-level, XLR combo connector
AN-16/i-M: XLR Input (mic/line) Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio -
AN-16/i-M: TRS Line Inputs & Send/Return Tip: Audio +; Ring: Audio -; Sleeve: Ground
AN-16/i-M: Audio Thru XLR; Pin 1: Ground; Pin 2: Audio +; Pin 3: Audio -
Direct coupled passive throughput
AN-16/i-M: Insert Send Impedance balanced; Nominal level: 0dBu; Peak
Level (A/D clip point): +14dBu
AN-16/i-M: Insert Return TRS balanced; Nominal level: 0dBu; Peak Level
(A/D clip point): +14dBu
AN-16/i-M: Analog to Digital Conversion 48kHz sample rate, 24 bit
AN-16/i-M: Operating Level +4dBu
AN-16/i-M: Frequency Response 4Hz-22kHz
AN-16/i-M: A-Net Output One Category 5 (RJ45 connector)
AN-16/i-M: A-Net Expansion One Category 5 (RJ45 connector)
AN-16/i-M: Gain Range Mic: +6dB to +60dB; Line: -15dB to +36dB
AN-16/i-M: Channel LED Indicators Signal Present and Clip, per channel
AN-16/i-M: Line Inputs Impedance: 48k ohms
AN-16/i-M: Metering LEDs; green: Signal Present, red: Clip; per channel
AN-16/i-M: Stereo Operation Stereo Link, per channel pair;
Two-position switch (Normal, Link)
AN-16/i-M: Maximum Input Level Mic: +14dBu; Line: +28dBu
AN-16/i-M: Input Impedance Mic: 2.4k ohms; Line (TRS): 33k ohms;
Insert Return: 39k ohms
AN-16/i-M: A/D Frequency Response -0.1dB @ 20kHz (-0.4dB @ 20.0kHz, measured from Mic or Line in)
-3dB @ 1.5Hz (-3dB @ 2.0Hz, measured from Micro Line in)
AN-16/i-M: THD +N < 0.003%
AN-16/i-M: Crosstalk -90dB
AN-16/i-M: Bit Error Rate (BER) 10-12
AN-16/i-M: Signal to Noise (unweighted) A/D: -105dB Reference = +14dBu (A/D clip point)Send jack: -113dB (Gain = minimum)
AN-16/i-M: EIN (Equivalent Input Noise) -128dBu
(Rs = 150 ohms, 20kHz BW, Gain = +60dB)
AN-16/i-M: CMRR 80dB @ 120Hz (Gain = +60dB)
AN-16/i-M: Low Cut Filter -3dB @ 85Hz, -18 dB per octave
AN-16/i-M: Phantom Power +48 volts, per channel, switch with LED
AN-16/i-M: Digital Outputs A-Net: 2 (Main and Aux); A-Net Expansion: 1
AN-16/i-M: Pro16 A-Net A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable
uses unshielded Cat-5e UTP (or better) cable
AN-16/i-M: Latency <0.880 msec (measured from analog input to analog output)
AN-16/i-M: Power Supply Internal, universal switching type; IEC jack
AN-16/i-M: Voltage 100-240VAC, 50-60Hz, 60W; Fuse: 250VAC, F4AL
AN-16/i: Audio Inputs 16, balanced line-level, 1/4-inch TRS connector
AN-16/i: Inputs Tip: Audio +; Ring: Audio -; Sleeve: Ground
AN-16/i: TRS Thru Impedance matched output
AN-16/i: Analog to Digital Conversion 48kHz sample rate, 24 bit
AN-16/i: Frequency Response 4Hz-22kHz
AN-16/i: A-Net Output One Category 5 (RJ45 connector)
AN-16/i: A-Net Expansion One Category 5 (RJ45 connector)
AN-16/i: Gain Settings Four-position switch, -10dBv, 0dBu, +4dBu and +22dBu
AN-16/i: Channel LED Indicators Signal Present and Clip, per channel
AN-16/i: Line Inputs Impedance: 48k ohms
AN-16/i: Metering LEDs; green: Signal Present, red: Clip; per channel
AN-16/i: Stereo Operation Stereo Link, per channel pair;
Two-position switch (Normal, Link)
AN-16/i: Maximum Input Level +22dBu
AN-16/i: Input Impedance 17.8k ohm
AN-16/i: Freq. Response 4Hz-22kHz +0.2dB/-3dB
AN-16/i: THD +N < 0.003%
AN-16/i: Crosstalk -90dB
AN-16/i: Bit Error Rate (BER) 10-12
AN-16/i: Signal to Noise (unweighted) 90dB typical, A/D to D/A
Measured from AN-16/i to AN-16/o Output Module
AN-16/i: Digital Outputs A-Net: 1; A-Net Expansion: 1; RJ45 connector
AN-16/i: A-Net Pro16 A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable;
use unshielded Cat-5e UTP (or better) cable
AN-16/i: Latency <0.880 msec (measured from analog input to analog output)
AN-16/i: Power Supply External, DC, universal switching type
AN-16/i: Input Voltage 100-240 volts, 50/60Hz, 30VA
AN-16/i: Output Voltage 18-24 VDC, 0.5 amp
AN-16/i: Plug Size 2 mm
AN-16/i: Power 18-24 VDC, 500mA
AN-16/o v.4: Audio Outputs 16 channels, balanced
AN-16/o v.4: Outputs DB25 multipin connectors (2); Tascam analog audio pinout
Impedance balanced output for mic, +4dBu and +18dBu; differential output for +24dBu
AN-16/o v.4: D/A Conversion 48kHz sample rate, 24 bit
AN-16/o v.4: Frequency Response 4Hz-22kHz
AN-16/o v.4: A-Net Input/Output One EtherCon Category 5 (RJ45 connector)
AN-16/o v.4: A-Net Expansion One EtherCon Category 5 (RJ45 connector)
AN-16/o v.4: Output Level Settings Four-position switch, per channel pair; +24dBu, +18dBu, +4dBu and Mic
AN-16/o v.4: Channel LED Indicators Signal Present and Clip, per channel
AN-16/o v.4: Metering LEDs; green: Signal Present; red: Clip; per channel
AN-16/o v.4: Maximum Output Level +24dBu
AN-16/o v.4: Output Impedance 226 ohms (+18dBu, +24dBu); 100 ohms (+4dBu and mic)
AN-16/o v.4: Freq. Response 4Hz-22kHz +0.2dB/-3dB
AN-16/o v.4: THD +N < 0.004%
AN-16/o v.4: Crosstalk -90dB
AN-16/o v.4: Bit Error Rate (BER) 10-12
AN-16/o v.4: Signal to Noise 92dB typical, A/D to D/A
Measured from AN-16/i to AN-16/o v.4 Output Module
AN-16/o v.4: Digital Connections A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1;
Neutrik EtherCon connectors
AN-16/o v.4: A-Net Pro16 A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable;
uses unshielded Cat-5e UTP (or better) cable
AN-16/o v.4: Latency <0.620 msec (measured from analog input to analog output)
AN-16/o v.4: Power Supply External, DC, universal switching type
AN-16/o v.4: Input Voltage 100-240 volts, 50/60Hz, 30VA
AN-16/o v.4: Output Voltage 24 VDC, 0.5 amp
AN-16/o v.4: Plug Size 2 mm
AN-16/o v.4: Power 24 VDC, 500mA
AN-16SBR: A-Net Input/Output Four EtherCon RJ45 Connectors
AN-16SBR: A-Net Bridge One EtherCon RJ45 Connector
Dimensions AN-16/i-M: 19 x 9.25 in. (482.6 x 234.95mm); 3U high
AN-16/i: 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
AN-16/o v.4: 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high
AN-16SBR: 1U high x 19" (482.6mm) wide x 1.25" (31.75mm) deep
Weight AN-16/i-M: 12 lbs (5.44 kg)
AN-16/i: 6.8 lbs. (3.08 kg)
AN-16/o v.4: 6.8 lbs. (3.08 kg)
AN-16SBR: 1.0 lbs(0.45 kg)
Feedback
Adorama.com is top rated for customer service HACKER SAFE certified sites prevent over 99.9% of hacker crime. BBB Accredited Business