Aviom One-Mix Personal Mixing System

Aviom
SKU: AVIMIX1 MFR: MIX1

About Aviom

The Aviom One-Mix Personal Mixing System is the perfect way to get started with Aviom personal mixing. It features one AN-16/i Input Module, which accepts up to 16 line-level input sources, as the head-end of the system. Audio is converted to digital and transmitted via A- Net, up to 500ft/150m over Cat-5e. A dedicated audio thru is available for each input channel, allowing the AN-16/i to be seamlessly inserted into an existing audio signal path.

The 16-channel A-16II Personal Mixer allows a performer to create and save up to 16 custom mixes and gives each performer control over channel volume, grouping, pan, stereo spread, along with master volume and tone. The system also includes an MT-1 to allow the personal mixer to be mounted on any standard mic stand. This basic mixing system can be easily expanded at any time by adding additional personal mixers.

Aviom Features

  • 16-channel stereo mixer
  • Fully adjustable pan per channel
  • Line/headphone audio output
  • Auto-detect mono/stereo circuitry
  • Simple set-up with Cat-5e cables
  • Sixteen Preset locations for storing custom mixes
  • Channel solo, mute and group functions
  • Global trim for reducing all channel volumes
  • Sixteen channel select buttons with dual LEDs
  • Pan/Spread control with LED readout
  • Channel volume control with LED level readout
  • Master Volume, Treble and Bass controls
  • Mounts easily on a mic stand with the included MT-1 Mic Stand Mount

Aviom Specifications

AN-16/i: Audio Inputs
16, balanced line-level, 1/4-inch TRS connector
AN-16/i: Inputs
Tip: Audio +; Ring: Audio -; Sleeve: Ground
AN-16/i: TRS Thru
Impedance matched output
AN-16/i: Analog to Digital Conversion
48kHz sample rate, 24 bit
AN-16/i: Frequency Response
4Hz-22kHz
AN-16/i: A-Net Output
One Category 5 (RJ45 connector)
AN-16/i: A-Net Expansion
One Category 5 (RJ45 connector)
AN-16/i: Gain Settings
Four-position switch, -10dBv, 0dBu, +4dBu and +22dBu
AN-16/i: Channel LED Indicators
Signal Present and Clip, per channel
AN-16/i: Line Inputs
Impedance: 48k ohms
AN-16/i: Metering
LEDs; green: Signal Present, red: Clip; per channel
AN-16/i: Stereo Operation
Stereo Link, per channel pair; Two-position switch (Normal, Link)
AN-16/i: Maximum Input Level
+22dBu
AN-16/i: Input Impedance
17.8k ohm
AN-16/i: Freq. Response
4Hz-22kHz +0.2dB/-3dB
AN-16/i: THD +N
< 0.003%
AN-16/i: Crosstalk
-90dB
AN-16/i: Bit Error Rate (BER)
10(-12)
AN-16/i: Signal to Noise (unweighted)
90dB typical, A/D to D/A Measured from AN- 16/i to AN-16/o Output Module
AN-16/i: Digital Outputs
A-Net: 1; A-Net Expansion: 1; RJ45 connector
AN-16/i: A-Net Pro16
A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; use unshielded Cat-5e UTP (or better) cable
AN-16/i: Latency
<0.880 msec (measured from analog input to analog output)
AN-16/i: Power Supply
External, DC, universal switching type
AN-16/i: Input Voltage
100-240 volts, 50/60Hz, 30VA
AN-16/i: Output Voltage
18-24 VDC, 0.5 amp
AN-16/i: Plug Size
2 mm
AN-16/i: Power
18-24 VDC, 500mA
A-16II: Audio Output
1/4-inch TRS stereo, headphone or line level
A-16II: Line/Headphone TRS Output
Tip: Audio Left; Ring: Audio Right; Sleeve: Ground
Auto-detects mono plugs
A-16II: A-Net Input/Output
1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector)
Digital to Analog Conversion Bit Depth
24 bit
A-16II: Signal to Noise Ratio
(Referenced to 0dB) -103dB
A-16II: Latency
<0.880 msec (measured from analog input to analog output)
A-16II: Pro16 A-Net
Uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices
A-16II: Tone Controls
Treble +/-12dB at 9kHz shelving
Bass +/-12dB at 160Hz shelving
A-16II: Maximum Levels (RMS)
Line/Headphone outs: 1.0 watt at 100 ohms
A-16II: Impedance
Line/Headphone outs: 32 ohms
A-16II: Power Supply
External, DC, universal switching type
A-16II: Input Voltage
100-240 volts, 50/60Hz, 30VA
A-16II: Output Voltage
18-24 VDC, 0.5 amp
A-16II: Plug Size
2 mm
MT-1 Mic: Connections
Attaches with three screws to bottom of A-16II or A-16CS
MT-1 Mic: Connectors
Size: 6-32, 1/4-inch long screws
Dimensions (W x D x H)
AN-16/i: 19 x 5.75" (482.6 x 146 mm); 1U high
A-16II: 10.75 x 5.6 x 2.25" (273 x 142.2 x 57.15 mm)
MT-1 Mic: 6.25" (158.75 mm) wide at front x 4.5" (114.3 mm) wide at rear x 3" (76.2 mm) high
Weight
AN-16/i: 6.8 lbs (3.08 kg)
A-16II: 3.4 lbs (1.54 kg)
top
Share this item:
Adorama.com is top rated for customer serviceHACKER SAFE certified sites prevent over 99.9% of hacker crime.