Broncolor Move 1200 L Power Pack Outdoor Para Kit
What's Included With This Item:
- Broncolor Move 1200 L Battery Power Pack with Lithium Battery and Charger
- MobiLED Lamphead
- Para 88 FB Reflector with Pulso Focusing Rod
- Hard Case
- Broncolor Warranty
The Broncolor Move 1200 L Power Pack Outdoor Para Kit is built around the improved Move 1200 L battery powered pack. Broncolor continues to raise the bar that Broncolor itself has set so high as an industry leader. The familiar blue handle and modern design are about all that has remained from previous incarnations. Two outlets distribute 1,200W/s of flash power either symmetrically or asymmetrically over 9.0 full stops and is variable in either 1/10 stop or 1 stop increments. It gets it there fast too, in every photographic sense of the word. Recycling time is a super-fast 0.02 to 0.9 sec. (min/max) with action-stopping flash durations of 1/1,000 / 1/350 sec (t0.5 /t0.1) at full power and as short as 1/20,000 / 1/8,500 at minimum power. That means fleeting gestures and water droplets among other subjects frozen in mid air if desired. It's great for sports and dance in the field as well.
At only 13.7 lb it's lighter that its predecessor and uses an Li-FePo4 Lithium battery that gives you up to 230 full power flashes at full power and up to 50,000 pops at minimum power. You can even run the modeling light on your selected head for up to 2.0 hours thanks to the inclusion of a Continuous Light Adapter. You won't wear out this battery anytime soon either: it's rated for 4,000 recharge cycles.
The Move clocks in at an ideal 5500K color temperature, maintained by proprietary Enhanced Color Temperature Control technology. With quality like this, tripping over sync cords is just not an option; The Move 1200 L's triggering options include optical, IR and radio slaves built into the unit. The Move has a radio range of at least 164' and depending on the circumstances, a possible 984'.
The kit's Broncolor MobiLED Lamp Head has a 1,600W/s rating and a unique 30W LED modeling lamp which outputs the equivalent of 100W of tungsten light but at a perfect 5,500K. The head features temperature activated fan cooling to increase the life of the flash tube and modeling light.
Multi-tasking photographers can take advantage of the Move's continuous light feature to use the modeling light on its own for video productions. The head's innovative design allows you to reverse its protective cap and use it as an umbrella reflector. A built in Broncolor bayonet mount enables use of the comprehensive array of Broncolor light shapers and accessories. The MobiLED is compatible with The Move 1200 L, A2L and A2R packs with the modeling light functioning and all other Bron packs without the LED modeling light functioning.
Rounding out the kit is the 34" Para 88 FB Reflector with Pulso Focusing Rod. It's built like an umbrella with 24 braces and specular silver coating on the inside. The precise front-focusing device is optimized for operation with Pulso G, Unilite, Litos, MobiLED, Pulso Twin and Pulso 8 and PulsoF2/F4 flash heads. It may also be used with the Broncolor F200/F400/F575 daylight lamp heads as well as Kobold DW200 and DW400 HMI heads. The Primo flash head may also be used with restrictions.
The design of the Para 88 FB yields very high light efficiency, wrapping the subject in brilliant light which emphasizes detail. Due to the calculated parabolic form of the reflector, light fall-off only occurs at the Para's extreme edge. The base Para 88 FB system consists of the Para 88 FB reflector with a bracket to mount Pulso-type lamp heads facing forward. This version of the Para 88 FB is complete with a focusing rod which allows mounting of a Pulso head in a rear-facing position for a softer effect.
The kit comes complete with the Move 1200 L pack, battery, power cord and charger, as well as the MobiLED lamp head with a Continuous Light Adapter and the Para 88 with a Pulso adapter for the MobiLED.
|Guide Number||f/64.1 6.5' (2.0 m) at ISO 100 with optional MobiLED Flash Head, P70 Reflector|
|Flash Duration||Minimum energy t0.5 / t0.1: 1/20,000 sec. / 1/8,500 sec.
Maximum energy t0.5 / t0.1: 1/1,000 sec. / 1/350 sec.
|Recycle Time||Normal mode: 0.02 - 1.9 sec.
Speed mode: 0.02 - 0.9 sec.
|Flashes per Charge||-50,000 at 4.0W/s -170 / 230 at 1200W/s Normal Mode / Eco Mode|
|Distribution||Symmetrical / Asymmetrical|
|Flash Variability||9.0 f/stops in 1/10th f/stop or full f/stop increments
4.5 - 1,200W/s
|Display||Illuminated Silicone Keyboard
Dust, Scratch Resistant LCD Display
|Power Pack: Modeling Light||100W x2 or 30W x2 or 30W Depending on Optional Flash Head in Use
Charge selectable Switch-off Time Setting (10/30/60 sec.)
Operates in Continuous Light Mode for over 2.0 hours
|Power Pack: Color Temperature||5,500K: via ECTC Technology (Enhanced Color Temperature Control)|
|Triggering||Manual Release Button, Photocell, RFS 2, sync Cable
Outdoors: up to 164' (50 m) (Possible Range up to 984' (300 m)
Indoors: up to 98' (30 m) (Possible Range up to 984' (300 m)
|Flash Ready Indicator||Switchable Visual and Audible Indication|
|Operating Voltage||Battery Operation: 14.4VDC, 6.6 AH Li-FeP04 Battery with Integrated Battery Status
Charging: 110 - 240VAC, 50/60Hz
|Power Pack: Circuit Protection||Yes|
|Power Pack: Fan Cooled||Yes|
|Battery Life||4,000 Charges|
|Lamphead: Modeling Light||30W LED, 12V|
|Flash Tube (CC)||1,600W/s|
|Output||At 1,200W/s at 6.5' (2.0) m, 100 ISO: 64 1/10 at Lighting Angle 130deg. (with Reflector P70)|
|Lamphead: Color Temperature||5,500K|
|Cable||11.5' (3.5 m)|
|Lamphead: Circuit Protection||Yes|
|Lamphead: Fan Cooled||Yes, 12V, Switches on only when Necessary|
|Mount||5/8" / 15.8mm|
|Dimensions||Move 1200 L Battery Power Pack: 8.3x6.7x9.0" / 21x17x22.8cm
MobiLED Lamphead: 9.5x6.8x4.7" / 24x17.2x11.9cm
Reflector: Open (DiameterxDepth): 34x24" / 86.3x60.9cm
Closed (DiameterxLentgh): 8.0x32" / 20.3x81.28cm
|Weight||Move 1200 L Battery Power Pack: 13.7lbs / 6.21kg
MobiLED Lamphead: 3.7lbs / 1.67kg
Reflector: 6.2lbs / 2.8kg