Download our latest NYC retail store ad here for our weekly specials!
Bron Kobold

Bron Kobold DW 200 PAR AC / DC Flight Kit, with 200 watt HMI Head, 2 Ballasts, Lamp, PAR Reflector ,Case & Scrims

SKU: BKK332U100 MFR: K332U100
Usually ships in 7-10 Business Days.
Your card will only be charged once item ships.
Why Adorama?
Easy Returns, Fast Shipping, Trusted for over 35 years.

Need help? Call 800-223-2500 212-741-0052

Our Price

$6,066.39
Free Shipping
Qty:

Add to Wishlist

About this item

This Kobold DW200 AC/DC PAR HMI Kit is based on the extremely compact Kobold DW200 focusable 200 Watt Daylight Focus Flood Light. The optimized design of the reflector achieves a high light output and a homogeneous illumination. The ergonomically positioned focusing knob enables focusing of 14-51°.

This daylight fixture has a solid design, compact dimensions and maximum reliability for all applications in the studio and on location. When the Kobold EWB-200 AC Ballast is connected to a 90-265VAC source, this weather-resistant ballast will provide dimmable power to your fixture via its included head-to-ballast cable.

The Kobold BB200/C DC Ballast is for the DW200 HMI fixture. When connected to your 26-34 Volt Battery source, it will provide dimmable power to your fixture, in areas where AC current is not available. Completing this kit are four lenses, which alter the intensity and spread of the light, two wire scrims, a four leaf barndoor set, stand mount, 200 Watt HMI Hot Restrike Bulb and an Flight Kit Case.

What's Included With This Item

  • Bron Kobold DW200 HMI Lamphead, 200 Watts
  • PAR Reflector
  • EWB-200 AC Ballast
  • BB200/C Battery Ballast (26-34VDC)
  • Four Lens Set for PAR
  • Four Leaf Barndoor Set
  • Scrim, Full Single 5"
  • Scrim, Full Double 5"
  • HMI Lamp 200 Watts/70 Volts
  • Storage Bag for Five Lenses
  • Flight Case
  • Bron Kobold Warranty

Key Features

  • Focus: Use the rotary knob on the rear of the fixture to adjust focus; note the corresponding "flood" and "spot" symbols on the fixture label indicating the adjustment directions.
  • PAR Reflector: Installation is quick and without any tools, due to a locking mechanism. The optimized design of this reflector achieves a high light output and a homogeneous illumination. Light output: Spot: 44940 lux / 4175 fc @ 9.8' (3 m) with no lens
  • Barndoor Set: To place the barn door on the fixture, slip it onto the impressed section of the ring and secure it with the knurled screw located opposite the recess. Pull the knurled screw and let it spring back into place; then tighten it to secure the barn door.
  • Hot Restrike: Socket and switches are equipped to allow switching the fixture on and off repeatedly without the delay of waiting for the bulb to cool.
  • Dimmable: The required light output can be set (100 - 60% adjustment range) with the power regulator. Color temperature can change with the power output depending on the type of lamp used.
  • Easy Connection: To connect the ballast unit to the fixture just plug in the corresponding connection. To disconnect, press the security mechanism on the socket before pulling out the plug. The DC Ballast has a two-pin connector.
  • LED Display: Green LED is lit continuously: normal operating mode. Green LED is flashing: the thermo protection is activated reducing the power continuously down to 60%. Red LED Blinking: the mains voltage has dropped below 85 V. If this LED is flashing, the lamp will be switched off automatically.
  • Safety: IP 43, I, with strengthened insulation for additional protection; can take splashed water at a 60° angle from vertical, 2- 3.15A Fuses , Ignition overload protection, Temperature monitor, Convection cooling, Meets CE Standards

Technical Specs

Light Fixture Rating 200 watts
Socket (Lampholder) GZY 9.5 for 200W SE HR lamp
Lens (Condenser) 4 Lens Set with Bag: Narrow, Medium Spots, Wide, Very Wide Floods
Mounting Baby (5/8")
HMI Ballast Rating AC: 200 watts, 90-265VAC
DC: 200 watts
Voltage range 30V battery: 26 - 34VDC
Voltage range 24V battery: 22 - 25VDC (output limited to 170W)
Cable 13' (4m) with fixture
HMI Ballast Dimensions 9.25 x 6.3 x 3.3" (23.5 x 16 x 8.5cm)
2.6 x 4.1 x 6.5" (6.5 x 10.5 x 16.5cm)
HMI Ballast Weight AC: 3.74 lbs (1.7kg)
DC: 1.75 lbs (750g)
Light Fixture Dimensions 6.75 x 5.85 x 4.3" (17.1 x 14.9 x 11cm)
Light Fixture Weight 2.6 lbs (1.2kg)
Kit Weight 27.75 lbs (12.6kg)
Feedback
Adorama.com is top rated for customer service HACKER SAFE certified sites prevent over 99.9% of hacker crime. BBB Accredited Business