brite-View HDelight Wireless 1080p HD Transmission Kit
What's Included With This Item:
- Brite View BV-1222T Transmitter
- BV-1222R Receiver
- AC Adapter
- USB Y-Cable
- 2 x HDMI Cables
- 2 x Screws2 x Anchors for Screws
- Brite View Warranty
The Brite View HDelight Wireless 1080p HD Transmission Kit is a transmitter/receiver pair that allows you to send uncompressed high-definition signals - up to 1080p at 60 Hz - wirelessly up to 30' for line-of-sight transmission. It's a great way to connect your HDMI-enabled laptop or desktop computer with a large-screen TV, without a tether.
Watching video or gaming on your laptop is fine when you're flying solo, but when friends and family want to join in, that flat-screen HDTV in the living room is the obvious choice. Just connect your laptop or other video source to the transmitter's HDMI input and your TV to the receiver's HDMI output and you're ready to go. Unsightly, ungainly tangles of wires can cause pratfalls that dash laptops to the floor - and with the HDelight, that's a thing of the past.
The HDelight kit's transmitter connects to a laptop or desktop computer's powered USB port, so there's no need to find a wall outlet. The transmitter has an input for one of the two included HDMI cables, so you can either connect it directly to your computer's HDMI output or via an adapter to another video output. The receiver, which connects to the target display's HDMI input, comes with an AC adapter. Everything's plug & play, so you won't have to install software anywhere. The transmitter works with both Mac and PC systems and even cameras and Blu-ray players with an HDMI output, as long as you can supply USB power.
|Supported Resolutions||1080p, 1080i, 720p, 576p, 480p|
|Audio Formats||Up to 6 Mb/s AC3 and DTS|
|Operation Distance||6.6-33' (2-10 m) line of sight|
|Latency||Less than 1 ms|
|Frequency Range||4.9-5.9 GHz (including non-DFS and DFS frequency bands)|
|Input||1x HDMI Type A (transmitter)|
|Output||1x HDMI Type A (receiver)|
|Switches||Transmitter: Power switch
Receiver: Power switch, INFO./Channel switch
|LEDs||Transmitter: 1x power LED (blue/red)
Receiver: 1x power LED (blue/red/purple); 1x status LED (blue)
|Power Requirements||Transmitter: USB Y-cable (provided) connected to 1 or 2 powered USB ports of PC
Receiver: 5V DC (100-240V AC in, 5V/2A DC out power adapter included)
|Operating Temperature||32 to 104deg.F (0 to 40deg.C)|
|Dimensions (WxHxD)||Transmitter: 82.6x84x38.9mm / 3.2x3.30x1.53"
Receiver: 181x145x33mm / 7.12x5.70x1.29"