Elinchrom ELC Pro HD 500 500W/s Compact Flash Head, 5500K Color Temperature, 8-Ch Transceiver, 300W Modeling Lamp, Up to 20 Flashes/Second

SKU: EL206131 MFR: EL 20613.1
Please note: This item is currently back-ordered by the manufacturer. Although we have no estimated time of arrival for this item, you can order it now and it will ship as soon as it arrives. Your card will only be charged once item is shipped.
Why Adorama?
Easy Returns, Fast Shipping, Trusted for over 35 years.

Need help? Call 800-223-2500 212-741-0052

$969.99 Regular Price
- $85.00Mail-in Rebate
view / download rebate

Final Price


You Save $85.00 (8.76%)

$39 per week
Free Expedited Shipping
Add to Wishlist

Protect your investment

About the Elinchrom EL 20613.1

The Elinchrom ELC Pro HD 500 500W/s Compact Flash Head is packed with professional features that can be expected from a flash head of this caliber and added quite a bit more. Short recycling times coupled with fast flash durations make freeze-motion, stop-action shooting possible. In fact, up to 20 frames per second is possible at minimum power. An intelligent low noise, temperature-activated fan keeps the head cool and lengthens the life of both the flash tube and modeling lamp. A pre-flash detector lets you integrate your on-camera flash into your studio system.

Power, variable continuously from 7 to 500W/s, can be mimicked by the 300W proportional modeling lamp to preview your effects. Although Elinchrom provides one, you can swap the sync cord with a separately purchased 8-channel transceiver for wireless triggering from your camera. The head has one built-in to receive the signal. Flash modes allow you to address special situations. The Sequential Mode enables triggering up to 20 ELCs in bursts or in a continuous cycle. Delayed Mode offers a choice of first or second curtain syncing while Strobo Mode allows single frame stroboscopic action sequences. Finally, the auto-sensing multi-voltage power supply means that you can use the ELC Pro HD 500 anywhere in the world.

Elinchrom EL 20613.1 Includes

  • Elinchrom ELC Pro HD 500 500W/s Compact Flash Head
  • Mains Cable
  • Sync Cable
  • Modeling Lamp (300W)
  • Glass Dome
  • Protective Cap
  • Reflector (6.3"/90deg.)
  • Elinchrom 2 Years Limited Warranty

Elinchrom EL 20613.1 Features

  • Built-in EL-Skyport receiver for triggering
  • EL-Skyport with 8 Frequency Channels with 4 Groups
  • EL-Skyport Speed Sync mode for synchronization up to a 1/320 s on enabled SLR cameras
  • Intelligent pre-flash detector system to enable the use of ELC units with speedlights
  • 7 f-stop range
  • Action freezing flash durations at full power - 1/2330 s at t.05 with flash durations up to a 1/5000s
  • Fastest recycling times always maintaining best stability
  • Up to 20 flashes per second
  • Super balanced color temperature with +/- 150 deg.K
  • Power Auto-dump
  • Multi-voltage auto-detection: 90-270 V (excluding modeling lamp)
  • Low 5 V sync voltage protecting all digital camera systems
  • Intelligent low noise fan; The electronically controlled fan spins slower or faster depending on the internal temperature of the unit
  • High impact resistant and fire retardant body shell
  • Accessory bayonet permits use of the complete range of light modifiers
  • OLED display for information and clarity.
  • Dashboard for an enhanced experience.
  • Highly precise control.
  • Flash modes: Sequence Mode, Delayed Mode, Strobo Mode
  • Built-in EL-Skyport receiver for triggering

Elinchrom EL 20613.1 Specifications

Maximum Watt/Seconds 500
Guide Number 212.6' (64.8 m) at 3.3' (1.0 m), ISO 100 with 48deg. reflector
Recycle Time At full power:
at 230VAC Slow: 2.0 sec, Default: 0.75 sec, Fast: 0.6 sec.
at 115VAC Slow: 2.5 sec, Default: 0.9 sec, Fast: 0.7 sec
Maximum flashes per sec at min power: 20
Flash Duration Min / Max: 1/2,940 / 1/2,330 at t0.5
At 53W/s: 1/5,000 (3.1 power setting)
Flash Variability 7.0 Stops: 7.0 - 500W/s Power range display: 0.3 - 6.3
Color Temperature 5,500K
User Replaceable Flashtube Yes, S-Type, Omega plug-in
Changeable Reflector Yes
Modeling Light Wattage 300W
Modeling Light Control Full, Free, Proportional
Voltage Stabilization Yes, +/- 0.1%
Flash Ready Indicator Audible and LED
Operating Voltage 90 - 265VAC, 50/60Hz
Sync Voltage 5.0V
Sync Socket 3.5 mm Jack
Umbrella Mount Diameter: 7.0mm (0.27")
Built-in Slave Cell Optical/IR
Integrated transceiver: 8 frequency channels with 4 Groups with full RX features
Circuit Protection Fuse
Power Consumption at 230VAC, 50Hz
Slow: during charge: 350
Default: during charge: 700
Fast: during charge: 875
at 115VAC, 60Hz
Slow: during charge: 250
Default: during charge: 500
Fast: during charge: 625
Pure Sine Wave Converter AC/DC, slow charge: 600 with halogen
Fan Cooled Yes, temperature-controlled
Auto Dump Yes
Dimensions With Protective Cap: 31.50 x 14.00 x 21.00cm (12.40 x 5.51 x 8.26")
Weight 2.35kg (5.18lbs)
Adorama.com is top rated for customer service HACKER SAFE certified sites prevent over 99.9% of hacker crime. BBB Accredited Business