Elinchrom EL 20616.1: Picture 1 thumbnail Elinchrom EL 20616.1: Picture 2 thumbnail Elinchrom EL 20616.1: Picture 3 thumbnail

Kit Savings
Elinchrom ELC Pro HD 1000 1000W/s Compact Flash Head, 5500K Color Temperature, 8-Ch Transceiver, 300W Modeling Lamp, Up to 20 Flashes/Second

SKU: EL206161 MFR: EL20616.1

Our Price

Buy more and save
Quantity Discount

The quantity discount will be reflected in your shopping cart

List Price: $1,611.19 - Free Item Value: $9.95 = $1,449.99

Availability: In Stock & Ready to Ship

Free Expedited Shipping

See all shipping options

Ways To Save

Product Highlights

  • EL-Skyport with 8 frequency channels with 4 groups
  • Intelligent pre-flash detector system to enable the use of ELC units
  • Feat: 8 f-stop range
  • Action-freezing flash durations of 1/1
  • Stable even at fastest recycling times
  • Up to 20 flashes per second
  • Consistent color temperature with +/- 150Kdeg
  • Power Auto-dump
Elinchrom EL 20616.1: Picture 1 regular $1,449.99

About Elinchrom EL 20616.1

This Elinchrom EL 20616.1 Bundle comes with $9.95 worth of free accessories including a JumpStart Guide to Lighting, Studio Flash Photography and Shipping is free!

The Elinchrom ELC Pro HD 500 500W/s Compact Flash Head is packed with professional features that can be expected from a flash head of this caliber and added quite a bit more. Short recycling times coupled with fast flash durations make freeze-motion, stop-action shooting possible. In fact, up to 20 frames per second is possible at minimum power. An intelligent low noise, temperature-activated fan keeps the head cool and lengthens the life of both the flash tube and modeling lamp. A pre-flash detector lets you integrate your on-camera flash into your studio system.

Power, variable continuously from 7 to 1,000W/s, can be mimicked by the 300W proportional modeling lamp to preview your effects. Although Elinchrom provides one, you can swap the sync cord with a separately purchased 8-channel transceiver for wireless triggering from your camera. The head has one built-in to receive the signal. Flash modes allow you to address special situations. The Sequential Mode enables triggering up to 20 ELCs in bursts or in a continuous cycle. Delayed Mode offers a choice of first or second curtain syncing while Strobo Mode allows single frame stroboscopic action sequences. Finally, the auto-sensing multi-voltage power supply means that you can use the ELC Pro HD 1000 anywhere in the world.

Elinchrom EL 20616.1 Features

  • EL-Skyport with 8 frequency channels with 4 groups
  • EL-Skyport Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
  • Intelligent pre-flash detector system to enable the use of ELC units with speedlights
  • Feat: 8 f-stop range
  • Action-freezing flash durations of 1/1,430 at full power (t0.5) and as short as 1/5,260 sec. at 80W/s
  • Stable even at fastest recycling times
  • Up to 20 flashes per second
  • Consistent color temperature with +/- 150Kdeg.
  • Power Auto-dump
  • Multi-voltage auto-detection: 90-265VAC excluding modeling lamp
  • Low 5V sync voltage safe for all digital camera systems
  • Intelligent low-noise fan spins slower or faster depending on the internal temperature of the unit
  • Impact resistant and fire-retardant body shell
  • Accessory bayonet permits use of the complete range of light modifiers
  • OLED display for information and clarity.
  • Dashboard for an enhanced experience.
  • Highly precise control.
  • Flash modes: Sequence Mode, Delayed Mode, Strobo Mode

Elinchrom EL 20616.1 Specifications

Maximum Watt/Seconds
Guide Number
298' (90.8 m) at 3.3' (1.0 m), ISO 100 with 48deg. reflector
Recycle Time
To full power
at 230VAC Slow: 4.0 sec., Default: 1.5 sec., Fast: 1.2 sec.
at 115VAC Slow: 5.0 sec., Default: 1.8 sec., Fast: 1.4 sec.
Maximum flashes per sec. at min. power: 20
Flash Duration
Min / Max: 1/2,780 / 1/1,430 at t0.5 At 80W/s: 1/5,260 (power setting: 3.6)
Flash Variability
8.0 Stops: 7.0 - 1,000W/s in 1/10 stop increments
Power range display: 0.3 - 7.3
Color Temperature
User Replaceable Flashtube
Yes, S-Type, Omega plug-in
Changeable Reflector
Modeling Light Wattage
300W GX 6.35
Modeling Light Control
Full, Free, Proportional
Voltage Stabilization
Yes, +/- 0.1%
Flash Ready Indicator
Audible and LED
Operating Voltage
90 - 265VAC, 50/60Hz
Sync Voltage
Sync Socket
3.5 mm Jack
Umbrella Mount
Diameter: 7.0mm (0.27")
Built-in Slave Cell
Integrated transceiver: 8 frequency channels with 4 Groups with full RX features
Circuit Protection
Power Consumption
at 230VAC, 50Hz
Slow: during charge: 350
Default: during charge: 700
Fast: during charge: 875
at 115VAC, 60Hz
Slow: during charge: 250
Default: during charge: 500
Fast: during charge: 625
Pure Sine Wave Converter
AC/DC, slow charge: 600 with halogen
Fan Cooled
Yes, temperature-controlled
Auto Dump
With Protective Cap: 31.50 x 14.00 x 21.00cm (12.40 x 5.51 x 8.26")
2.90kg (6.39lbs)
Mfr #
Share this item:
Adorama.com is top rated for customer serviceHACKER SAFE certified sites prevent over 99.9% of hacker crime.