





This item is no longer available.
Review Summary
2007-02-04T19:00:00
The case did well at what it was designed for and was much cheaper than the dive case that sony makes for my camera, so I can't complain. I also took some good pictures in the case. However, it is very bulky for a camera the size of mine (Sony dsc-p10) and always seemed to be floating in the way when I was in the water. The case is made for several different brands and models of cameras and I guess mine is on the smaller end, so there was a lot of extra room inside the case. Your camera will not bounce around inside because you remove the air out from in the case when you put the camera inside, but it is just a lot of extra material that made it difficult to use the camera. The only other negetives that I had with the case was that you can't use many of the camera functions inside the case (because of the design of my camera and the extra material of the case I could just hit the shutter button and power button) and it was also very difficult to see through the case at what you were taking a picture of.
The W.
Manufactured from double laminated PVC and has an optical glass port. It is rated for dives of up to 10 metres depth.
Perfect for snorkelling, shallow diveing, sandy, dusty, humidity or foul weather conditions. This housing will give your camera the best possible protection while being fully operable.
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of two screw knobs. The housing was specially designed for the Sony DSC-P series of digital stills cameras. It will also suit other cameras of similar size and dimensions.