

This item is no longer available.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
12 - 17 cm ( 4 3/4 - 6 2/3 inches )
15 cm ( 5 9/10 inches )
13.5 cm ( 5 1/3 inches )
75 mm ( 2 15/16 inches )
350 g ( 0.75 lb )
The D-A housing allows you to take your camera down to a dive depth of 30meters / 100 feet. The D-A is the perfect housing for snorkeling, out-door sports and even scuba diving. The housing can be used on small boats, in the surf, while swimming, snorkeling or diving. It's easy to operate the camera as its various components and buttons can be operated through the PVC.
With this housing, a whole new world of applications opens up for your digital camera. Inside the housing you can now take the camera safely canoeing, snorkeling or even diving, up to a depth of 30 m / 100 ft.
Experienced photographers have confirmed, that the auto focus and flash both continue to function perfectly. As you descend, the air is pressed into the camera. Due to this, the pressure inside the housing will remain the same as the surrounding water pressure (this is the reason why ewa-marine housings are so safe to use: implosions are impossible). Due to this, we have to start the dive with a suitable amount of air inside the housing. The foam pads supplied with the housing are part of this air "reservoir" and additional air should also be blown into the housing, via the valve at the rear, to ensure that the maximum potential volume is being utilized.
The D-A housing is manufactured from double laminated PVC and has an integrated, optically neutral flat glass port. The flip-up, internal flash, that can be found on some models will fit into the specially designed section on the top of the housing, allowing its use above and under water.
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of three screw knobs.
It is supplied in a handy yellow carry-case which has a water-proof interior and zippered side-pocket.