• Consistently professional, consistently stable in every respect and consistently compatible! In short, the new EH Pro range from HENSEL is, if you look closely, the sum total of 40 years of experience!
Housed in a 2.5 mm thick solid aluminium drawn profile with a metal reflector quick-change system and a cast pan-tilt plate made of aluminium, these heads are perfect for any professional because of their mechanical construction alone.
The heads can be used with all EH accessories. Typically for Hensel, the reflector can be put on or taken off in any position and / or rotated about 360°.Slot-in flash tubes', the bright 650 W modelling light, the high-performance yet quiet fan and a clear safety dome are also part of the basic equipment, as is the integrated umbrella holder with fast-clip fitting. There is a main on/of switch on the head.
The flash tube / modeling light position has been optimized under measurement room conditions using specialist analysis software and stroboscope camera technology, so it offers the best possible combination of flash and modeling light, optimum light yield and short burn-down times. All this combined with the almost legendary durability of the flash tubes gives a stable colour temperature and low maintenance costs.In simple terms: Consistently good!
|Maximum Power (Watt Seconds)||3000 w/s|
|Flashtube Protection||Glass Dome|
|Modeling Lamp Wattage||650w|
|Cable length||15 ft.|
|Dimensions||L x W x H: 9.45 x 5.91 x 9.06 in.|