Ikelite iTTL Adapter with Ikelite Connector for for Nikon D2X Digital SLR Camera
Mfr. Part: 4301.2 SKU: IK43012
|
|
 |
|
|
|
Description
Proven effective since its introduction in mid-2005, our Nikon iTTL conversion circuitry is now available for use with non-Ikelite housings. Let the camera adjust your Ikelite Substrobes while you focus on composition and enjoy the confidence of perfect exposure
Substrobe Compatibility
Proper operation and TTL exposure requires use of a current-model Ikelite DS Substrobe. Every TTL adapter is equipped with a simple rotating switch that allows effortless toggling between TTL and manual exposure. When in TTL mode, exposure compensation may be accessed via the camera's built-in menus.
Single or dual Substrobes may be connected to the adapter using an appropriate #4103.51 (single) or #4103.52 (dual) sync cord. Use of dual Substrobes requires a #4103.52 dual sync cord. Two Substrobes cannot be controlled by individual adapters even if the housing is equipped with two bulkhead connectors.
Please note that strobe requirements may differ by adapter and camera models. TTL adapters are NOT intended for use with non-Ikeliteand/or non-digital underwater strobes.
Housing Compatibility
Ikelite TTL adapters are compatible with many brands of underwater camera housings that feature an external strobe connector. The housing must have either an Ikelite (ICS) style or standard Nikonos V style bulkhead connection. A 5-conductor TTL hotshoe for attachment to the camera is also required.
Please refer to printed specifications or contact the product manufacturer or representative for specific information regarding the wiring of your housing. We cannot confirm proper wiring or operation of a non-Ikelite product.
TTL adapters are NOT intended for use with Ikelite brand underwater camera housings
For Housings with Ikelite-Style TTL Bulkhead:
#4301 Adapter for Nikon D-40, D-50, D-70, D-70S, D-80, D-200, or Fuji S5 Pro digital SLR cameras
#4301.2 Adapter for Nikon D2X digital SLR cameras
TTL adapters with Ikelite-style connectors on the housing end provide the best of everything: Nikon iTTL exposure combined with the industry favorite, proven rugged Ikelite strobe connector.
NOTE: #4301.2 TTL adapter for Nikon D2X camera will not provide proper TTL exposure if used with other Nikon dSLR cameras. Compatibility with the Nikon D2H camera has not been confirmed.
For Housings with Nikonos-Style TTL Bulkhead:
#4302 Adapter for Nikon D-40, D-50, D-70, D-70S, D-80, D-200, or Fuji S5 Pro digital SLR cameras
#4302.2 Adapter for Nikon D2X or D2H digital SLR cameras
TTL adapters with Nikonos-style connectors on the housing end feature Delrin fittings that prevent problems related to corrosion, electrolysis or seizing.
Please note that these adapters have an Ikelite-style fitting at the strobe end and require the use of a #4103.51 (single) or #4103.52 (dual) Ikelite-to-Ikelite sync cord. |
Features
 |
For Non-Ikelite housings fitted with Ikelite TTL hotshoe & bulkhead |
|
Same TTL conversion circuitry proven effective in Ikelite housings for Nikon dSLR cameras |
|
Convenient switch allows for toggling between TTL and manual exposure |
|
Reliable Ikelite bulkhead connection at strobe end for attachment of single or dual sync cord (sync cord not included) |
|
Compatible with many brands of underwater camera housings |
|
|
|
|
|
|
Add to Wishlist
Email this Page
Print
