Wireless remote camera control has never been easier. Instead of using conventional infrared transmission, the new WR-R10 and WR-T10 communicate via radio for increased range.
Because radio transmission is used, communication is possible even with no direct line of sight between devices for use up to 66 feet (up to 164ft when using WR-R10 as a transmitter). These wireless remote control accessories also enable various operations such as autofocus, video recording, continuous shooting and quiet shutter-release shooting.
Use the WR-T10 as a transmitter, to trigger a single or multiple cameras with the WR-R10 attached. This permits capture of the same moment from multiple perspectives and with different lenses as a still and/or video.
Compatible with the following products: DX-D-SLR: D3100, D3200, D5100, D5200, D90, D7000, D7100, D300 series (D300 series - requires WR-A10 Adapter) FX-D-SLR: D600, D700, D800 series, D3 series, D4 (D700/D800 series, D3 series and D4 require the WR-A10 Adapter)
WR-T10 and WR-R10(s) have to be set to the same channel and paired in advance to achieve simultaneous release.
Note: Depending on the camera, there may be a limitation to the accessories that can be attached simultaneously with the WR-R10 Wireless Remote Controller. Attempting to forcibly attach accessories can damage the camera or accessory.
Communication between WR-R10 units: Only available when master camera employs ten-pin remote terminal
The WR-10 is compatible with the following Camera
Please Note: These cameras must use the WR-A10 (10 pin) Adapter):
• D4s/D4 • D3/D3X/D3S • D2Hs/D2Xs • D810 • D800/D800E • D700 • D300/D300s • D200
The Following cameras have a accessory terminal and connect directly to the Remote without a WR-A10 Adapter • Df • D610 • D600 • D7100 • D7000 • D5300 • D5200 • D5100 • D5000 • D3300 • D3200 • D3100 • D90 • COOLPIX A • COOLPIX P7700 • COOLPIX P7800
* The Compatibilty List is as of 06/30/14