Kenko Lens2Scope Adapter for Canon EF Mount Lenses - Angled Eyepiece
The new KENKO LENS2SCOPE adapter is an accessory that can change any lens into a spotting scope. The LENS2SCOPE adapter's light-weight composite body houses a high quality roof prism, optics and an eyepiece just like a traditional spotting scope. When the lens is attached it becomes a spotting scope to use for viewing. The lens mount and housing for the optics are made from metal while some external barrels are polycarbonate.
The optics in the LENS2SCOPE magnify the image by a factor of 10x so that a 100mm lens would have the same magnification as a 1,000mm lens when viewing. Focus is easily achieved by using the lens' manual focus ring.
There are two versions of the LENS2SCOPE, a straight eyepiece (pictured) and a version where the eyepiece is angled up. They are both available in Canon EOS, Nikon, Pentax and Sony.
The LENS2SCOPE has a removable tripod adapter for mounting onto a tripod for more comfortable viewing for extended periods of time. The tripod mount can support up to 800g. If you want to use a lens heavier than 800g, please use a tripod mount on the lens.
This small accessory comes with its own carrying case and takes up about as much room in a camera bag as a normal lens.
|Lens construction:||5E / 3G|
|Prism system:||Roof prism|
|Apparent field of view:||42 degrees|
|Maximum exi pupil:||2.5mm|
|Eye relief:||20mm with foldable eyecup for glass wear observation|
|Spotting scope magnification ratio:||1/10X the focal length of the lens mounted|
|Loupe magnification ratio:||25X when the lens mounted has 1:1 macro capability.|
|Focus adjustment:||By camera lens|
|Dioptry change:||-5D to +3D by camera lens focus compensation|
|Dimensions:||LxWxH 180x80x110mm (7.08x3.14x4.33in.)|
|Weight:||Approx. 185g (6.52oz.)|