Generally when you extend a large accessory such a flag or light fixture laterally past the center column of a C stand, the increased leverage may be too much for the grip head to bear. In the old days you could rectify this situation using another C stand as an additional support, or a combination of clamps, grip heads and grip arms.
Kupo has developed an innovative solution that rapidly mounts between both the riser section of a Master C Stand with help of either a Kupo 3 or 4 Way Clamp and to a grip arm with the help of the included Kupo Tiny clamp already mounted on the other side of the Grip Arm Support. The Grip Arm Support has a built in ball joint that rotates 360 degrees for infinite flexibility and extends from 22 - 30.7" (56 - 78cm). With the addition of the Grip Arm Support, the load capacity at the end of your grip arm is greatly increased.
|Material||Aluminum, Stainless Steel Bolts|
|Minimum Jaw Diameter||0.08 inches / 2 mm|
|Maximum Jaw Diameter||0.63 inches / 16 mm|