Kowa TSN-DA1 Digiscoping Digital Camera Adapter

Kowa

About Kowa TSN-DA1

The Kowa TSN-DA1 Digiscoping Digital Camera Adapter device allows you to digiscope with your Kowa TSN-60, TSN-66 and TSN-82 series 60mm, 66mm or 82mm spotting scope. You'll still need to use an eyepiece with your spotting scope. Additionally, if you intend to use the TSEZ7 or TSEZ7B 20-60x eyepieces, you'll need the TSNDA1ARZ7 Extension Ring as well.

To use the DA1, just affix it to the outside of your scope's eyepiece, attach a TSN-AR adapter ring to your camera's filter threads, then attach camera + TSN-AR ring to the DA10. If your camera does not accept filters, you can use the TSN-DA4 bracket in much the same way.

The focal length of your digiscoping combination is based on the focal length of your digital camera's lens while in use and the eyepiece's magnification. So if you were using a 100mm digital camera lens and a 20x eyepiece, the combination would produce a focal length equivalent to 2000mm. All ventures in the world of digiscoping require the use of a sturdy tripod, first and foremost. You must take great care to keep vibrations during exposure to an absolute minimum. Employing a cable release, electronic release or remote control for tripping the shutter is absolutely necessary. And while it is not necessary per se, the TSN-DA3 Mounting Bracket will do wonders to reduce vibrations of your rig.

Kowa TSN-DA1 Features

  • For 66mm & 60mm Series Scopes
  • For Any Digital Point & Shoot Camera
  • Attaches to Outside of Eyepiece
  • Requires TSN-DA4 or TSN-AR Adapter Ring

Kowa TSN-DA1 Specifications

Compatibility
66mm & 60mm Series Scopes
top
Share this item:
Adorama.com is top rated for customer serviceHACKER SAFE certified sites prevent over 99.9% of hacker crime.