The Skeletool CX has a large straight knife blade that can be accessed while the tool is closed; to open it, just place your thumb in the thumbhole at the base of the blade and rotate it out until it's fully extended - which will engage the safety lock. This locking mechanism is noted with a padlock symbol on the tool. To unlock the blade, press the locking mechanism towards the handle until the blade slides past the lock.
Equipped with a universal bit driver, the Skeletool offers real utility options like no other multitool. To change the tool bits, simply unfold the tool and remove the bit from the bit driver - and pop it out. And replacing bits is just as easy. Just press a new one into position and you're good to go. There's even a spare bit located in the handle side opposite the knife blade. This tool includes the following bits: Phillips #1 and #2, screwdriver 3/16-inch and 1/4-inch. In the plier jaws you'll find a hard-wire cutter and a regular wire cutter. The regular wire cutter is great for softer grades of wire, but the hard-wire cutter is excellent for heavier jobs - like cutting and bending fishhooks.