The matched pair of M-Audio Pulsar II small diaphragm condenser microphones feature gold-sputtered Mylar 3/4" diameter diaphragms. They also feature Class A FET transformerless electronics and brass bodies with internal shockmounts. Each microphone has a cardioid polar pattern, focusing on sources to the front and rejecting sound from the sides and rear.
Each Pulsar II microphone has a switchable 10dB pad and a switchable low cut filter at 80Hz. The matched pair includes a stereo mounting bar, hard mounts, risers, windscreens and soft bags. A wooden travel case is also included to contain and transport the microphones and all accessories.
|Type||Small diaphragm condenser|
|Capsule Diameter||0.75" (19 mm)|
|Frequency Response||20 Hz to 20 kHz|
|Sensitivity||13.8 mV/Pa (-37 dBV ref. 1V/Pa)|
|Maximum SPL||134 dB < 0.5% threshold level
144 dB SPL with 10 dB pad engaged
|Equivalent Noise||15 dB (A-weighted)|
|Output Impedance||300 to 600Ohm|
|Recommended Load Impedance||1kOhm to 2.5kOhm|
|Topology||Class A FET, transformerless|
|Power Requirement||30V to 50V Phantom power|
|Dimensions (Dia x L)||0.87x5.2" (22x132 mm)|
|Weight||4 oz (115 g)|