| Maximum Power Capacity |
600VA / 300W |
| Topology |
Standby UPS |
| Input: Nominal Frequency |
50 or 60Hz, ±5Hz, autosensing |
| Input: Voltage Range |
100 - 140VAC |
| Input: Low Voltage Transfer Point |
96V (± 3%) resets to utility power at 101V (± 3%) or higher |
| Input: High Voltage Transfer Point |
146V (± 3%) resets to utility power at 140V (± 3%) or lower |
| Input: Surge Energy Rating |
320 J |
| Input Protection |
Resettable circuit breaker |
| Output: Voltage Range |
Non-Battery Operation: 120VAC: 100 - 140VAC |
| Output: Frequency Range |
Non-Battery Operation: 60Hz: 55 - 65Hz or 50Hz: 45 - 55Hz |
| Output: Waveform Type |
Battery Operation: Simulated sine wave |
| Output: Nominal Voltage |
Battery Operation: 120VAC |
| Output: Voltage Regulation |
Battery Operation: Nominal ±5% (until Low Battery Warning) |
| Output: Frequency |
Battery Operation: 50/60Hz, ±0.5Hz (unless synchronized to utility) |
| Output: Transfer Time |
Battery Operation: 6-8 ms Typical |
| Output: Overload Capacity |
Battery Operation: 105% for 10-seconds, 115% Shutdown Immediately |
| Output: Protection |
Battery Operation: Over-Current, Short-Circuit Protected and Latching Shutdown |
| Safety Approvals, EMC |
UL1778, cUL (CSA 22.2 no. 107.1), FCC Class B |
| Dimensions (L x H x W) |
11.97 x 4.84 x 3.35" (304 x 123 x 85 mm) |
| Weight |
7.05 lb (3.20 kg) |