Novatron D1500 Pack with 3 Flash Heads & Sync Cord.

• This Pack and Head Group kit does not include umbrellas, stands, or a case.

D1500 is the most powerful in Novatrons new generation of rugged and sophisticated all digital flash power packs. The 1500 watt-seconds fan cooled pack, is fully microprocessor controlled and has an output which is variable in 1/10'th stop increments over its' entire 4-1/2 stop power range (this is MORE than double the range of our previous 1500 watt-sec units!).

Output power is displayed on a 1/2 inch tall 4 digit LED display which is easily visible from many feet away under normal room lights.

The D1500 power pack also provides misfire alarm functions and supports all standard Novatron flashheads and is sync voltage compatible with most current digital cameras on the market. To support the new higher power modeling lamps, these packs have a second circuit breaker dedicated just for the lamps and are designated as Series II.

This second breaker allows these units to handle the 250 watt halogen modeling lamps used in the fan-cooled flash heads (1000 watts total modeling lamp power per pack). The 2100-C Standard Flashhead does not contain any controls to ratio the power or the modeling light. It comes equipped with a 1000 watt second flash tube (color corrected to 5500'K), 100 watt tungsten modeling lamp, 15' power cord, and a mounting bracket with knobs for securin g the bracket to a light stand and attaching an umbrella. This bracket also has a universal adaptor base which allows it to a standard 5/8'' stud (with an optional accessory 4041 adaptor it can also mount to a smaller 3/8'' tube/stud).

The 2140-C 3-Way Switching Flashhead contains the controls to operate at full power or ratio the power and the modeling light down one stop (-1) or two stops (-2). The flashhead cannot be turned completely off.

The 2140-C Flashhead comes equipped with a 1000 watt-second flash tube (color corrected to 5500'K), 100 watt tungsten modeling lamp, 25' cord, and a mounting bracket with knobs for securing the bracket to a light stand and attaching an umbrella. This bracket also has a universal adapter base which allows it to mount to either a standard 5/8'' stud (with an optional accessory 4041 adaptor it can also mount to a smaller 3/8'' tube/stud).