The Interfit Strobies Modi-Lite Accessories Kit consists of Beauty Dish and Accessories. The standard reflector is a multipurpose design allowing the Beauty Dish and Honeycomb to snap into place in seconds. The Beauty Dish is ideally placed around four feet from the subject either camera mounted or on a boom arm. It is supplied with transparent snap on disc to allow light to pass though or interchangeable with Soft Gold for a warm tone or Silver for neutral looking effects. The honeycomb is ideal to create spot lights and can be used with color gels.
The Uni-Mount serves as a multipurpose holder able to fit the majority of manufacturers flashguns, without the aid of any tabs, rubber bands or Velcro to obtain a firm grip on your flashgun up to a maximum size of 58 to 78 mm with a minimum grip of 30 mm. The color diffuser supplied enables multiple light patterns to your background. The transparent diffuser also makes an excellent neutral light source. The tungsten diffuser allows you to work with a tungsten light source and flash at the same time or as a creative light source at 3200K.
The softbox can be used directly on camera or off camera, with or without its soft cover for high contrast lighting. The snoot is supplied with two honeycombs that add additional effects to the background or direct light to a small spot. Barndoors fit directly in to the Uni-Mount to provide a soft uniform light pattern, used in many ways from portraits to backgrounds.
The Modi-Lite kit is supplied with a unique insight into the Strobists world of hotshoe flashguns, on the DVD show you how to set up the kit, assemble each of the items and show you how to use them and the effects that can be achieved with the Modi-Lite kit Products.
The Uni-Mount serves as a multipurpose holder, able to fit the majority of manufacturers flashguns, without the aid of any tabs, rubber bands or Velcro to obtain a firm grip on your flashgun. Each Uni-Mount can be used up to a maximum size of 58 mm to 78 mm with a minimum grip of 30 mm, ensuring a wide range of Speedlites can be used.
Simply measure the front end fitting of your Speedlite in a vertical direction to ensure it is within the 30 mm to 58 mm range for a stable and tight fitting provided by the thumbscrew clamps pre-assembled with a soft rubber surface . On to the right of the image you can see the component release mechanism providing a stable, strong tight hold ensuring the kit's contents will not fall off during shooting.