Paglight L24 & L30 250W..A compact and portable 250W fill-light available in 24V and 30V models, and incorporating many features of PAG's on-board camera light.
Fully-focusable: Focusing is provided by a lever situated on the side of the lamp body and is continuously variable from narrow to wide angle.
Plug-in Lampholders: A lampholder unit plugs into the back of the light and is locked in position. It can be easily withdrawn making lamp replacement safe and quick.
Heat Dissipation: The lamp body and reflector housing are constructed to maximise the dissipation of heat as well as to provide strength and impact resistance.
Perfect Positioning: The lampbody has a multi-directional mounting and may be adjusted vertically and horizontally. The desired position can be maintained by a locking lever situated on the side of the light base.
Detachable Power Base: The 250W Paglight has a detachable power base that incorporates a lead terminated with an XLR-4 connector. This can be used to power the light from a Pagbelt IC2 or Powerman battery. The base incorporates a 1/4" Whit. bush which enables the light to be mounted to a tripod or a handle.
Universal Mounting Options: There are a number of options (not included) available for mounting the Paglight directly to the camera:
Paglight is supplied with a 1/4" Whit. male to male Stud Adaptor that enables you to mount the Paglight directly to a camera, or to the Camera Clamp.
Paglight is also supplied with a 1/4" Whit. Camera Shoe Plate that enables you to mount the Paglight directly to any camera equipped with an accessory shoe.
Handle with a 1/4" Whit. stud can be screwed directly into the Paglight base. Always tighten the locking wheel firmly; this will secure the base while retaining the swivelling facility. The Handle also enables the light to be mounted to the camera in an elevated position.
The Extender Arm allows flexibility in the positioning of the Paglight when mounted on the camera. For example, it can lift the Paglight clear of the microphone, to avoid the casting of any shadows. In addition, the Extender Arm can be locked to the left or right of centre, allowing the subject to be lit from the side.
Includes shoe for Sony type mounts and an adaptor and shoe plate for Panasonic type mounts. PAG also produces a range of Mounting Adaptors which enable the Paglight, to be mounted to any camera, tripod, lighting rig or gaff grip.