Phottix Odin TTL Flash Trigger & Receiver Set for Nikon, 100m+ Distance, 4 Channels, 2.4 GHz Frequency, 1/8000 sec Max Sync Speed

See all Phottix items

About Phottix

The Phottix Odin TTL Flash Trigger & Receiver Set consists of an on-camera transmitter and control unit (TCU) and receiver units for compatible hot shoe flashes. The Odin offers photographers four wireless channels and three flash control group designations. Flashes can be controlled in TTL or manual mode, or A: B ratio mode with EV +/- adjustments of three stops.

What makes the Phottix Odin unique is the ability to designate groups in TTL/Mixed mode. Individual groups, A, B, C, can also be controlled in TTL mode with EV +/- adjustments. Groups can also be set to Manual mode, adjusting power levels remotely in 1/3 stop increments, or turned off.

The Phottix Odin TTL Flash Trigger & Receiver Set is backward-compatible with Phottix Strato 4-in-1 and Phottix Strato II Multi 5-in-1 Wireless Triggers. Current Phottix users will have no problem adding the Odin to their systems. As the world of cameras and flashes are always changing the Phottix Odin system can be upgraded when needed using the built-in USB ports.

Phottix Features

  • Zooming ahead: Flash head zoom can be dynamically adjusted as photographers adjust their lenses. Flash zoom can also be easily adjusted manually and set statically from 24 to 105 mm. The Phottix Odin system will also trigger compatible non-TTL flashes and studio strobes
  • Remote power control of groups in TTL with +/- EV adjustments (3 stops in 1/3 stop increments - 18 different levels.)
  • Remote manual mode flash power control with 1/3 stop adjustments
  • Remote flash head zoom adjustments - auto or manual
  • Mix TTL and Manual flash - fire some groups in TTL, others as manual
  • Remote power control in A:B ratio modes with +/- EV adjustments
  • High speed sync - shutter speeds up to 1/8000 sec
  • Second curtain sync functions
  • Compatible with Phottix Strato 4-in-1 and Phottix Strato II Multi 5-in-1 Wireless Triggers
  • Upgradeable firmware via built-in USB port

Phottix Specifications

Flash Tigger Specifications:
Flashes: Nikon SB-400, SB-600, SB-700, SB-800, SB-900, SB-910 Cameras: D70
2.4 GHz
4 channels
3 groups - A, B, C
2 x AA batteries (TCU and Receiver), 5V DC on receiver (external power port)
Max sync speed
1/8000 sec
Hot shoe, 3.5 mm port (receiver)
USB port (transmitter and receiver)
1/4 tripod lug, cold shoe (Receiver)
Input voltage
Flash port voltage handling
6V (transmitter) =300V(receiver)
Built-in PCB antenna
Operating temperature
Storage temperature
Dimensions (L x W x H)
transmitter: 94 x 66 x 35mm / 3.70 x 2.59 x 1.37"
Receiver: 90 x 45 x 40mm /3.54 x 1.77 x 1.57"
Transmitter: 105g / 3.70 oz
Receiver: 66g / 2.32 oz (without batteries)

Questions & Answers Powered by TurnTo®

Questions about this item:

Rob H  The Phottix website says the D70/s is NOT compatible. Specs here say it is. Can anyone confirm whether or not D70 actually works?
HENRY D  Hello Robert, The Plus III unit should work with any came that has a hot shoe.
soriano.covello s  I want to know if this radio sync at high speed with elinchrom products, like bxri, quadra, I know these two have a short flash duration. If this radio doesnt work which one do?
Andrew R  Unfortunately, Phottix does not specify. The instruction manual indicates that High Speed Sync is available when used with camera and flash units that are HSS compatible (they do not test 3rd party flash units for compatibility). There are radio triggers available from other makers that offer high speed sync, but those tend to max out at 1/250sec.
Shopper  Is the LCD display lighted? I do a fair amount of night photography.
TIMOTHY R  the Phottix Odin trigger for the Sony display is lighted.
Share this item: is top rated for customer serviceHACKER SAFE certified sites prevent over 99.9% of hacker crime.