Rolls REQ313 Single Channel 31 Band Constant Q Equalizer with XLR and 1/4" I/O's and Low Cut Filter
Estimated Delivery time is from 1 to 2 weeks.
The ROLLS REQ313 graphic equalizer is intended for room equalizing or sound shaping and the approximate frequency response curve can be seen graphically by the settings of the frequency controls. Recording and broadcasting studios, sound contractors and musicians will appreciate the low noise, straightforward design and versatile signal control of the REQ313.
The equalization filters in the REQ313 are constant bandwidth (constant Q). The bandwidth of each individual filter is narrow enough to prevent unwarranted interaction between filters, yet wide enough to produce exactly the type of correction curve demanded by even the most unusual acoustic surroundings.
|Equalizer: Frequency Response||20Hz - 20kHz|
|Equalizer: Accuracy||5% Center Frequency|
|Equalizer: Range||+6dB or +12 dB (Switch selectable)|
|Input: Type||Active Balanced/Unbalanced|
|Input: Connectors||XLR, 1/4" TRS|
|Input: Impedance||12k Ohms|
|Input: Maximum Level||+22 dB (Balanced), +15dB (Unbalanced)|
|Outputs: Type||Electronically Balanced|
|Outputs: Connectors||XLR, 1/4" TRS|
|Outputs: Impedance||600 Ohms|
|Outputs: Maximum Level||+22 dB (Balanced), +15dB (Unbalanced)|
|Passive Bypass Switches||Yes|
|Overload LED Threshold||3dB below clipping|
|Low Cut Filter||10 - 250Hz, 12dB/Oct.|
|Frequency Response||20Hz - 20kHz, +0.5dB|
|THD + Noise||0.01% (20Hz - 40kHz)|
|S/N Ratio||110dB below Max level (A weighted)|
|Equivalent Input Noise||-95dB (20kHz noise bandwidth)|
|Dimensions (W x D x H)||3.5" x 19" x 8.5" / 8.89 x 48.26 x 21.59 cm|