Buy the Celestron MD-4 Dual Axis Motor Drive with Hand Control for CG-4 Mounts and Advanced C4 R, C6 N (with CG-4 mount). on http://www.adorama.comPrint This PagePrint This Page
Celestron MD-4 Dual Axis Motor Drive with Hand Control for CG-4 Mounts and Advanced C4 R, C6 N (with CG-4 mount). image
 
(based on 2 ratings)
Brand:Celestron
Located in:Binoculars & Telescopes, Telescopes and Accessories, Telescope Accessories
Celestron MD-4 Dual Axis Motor Drive with Hand Control for CG-4 Mounts and Advanced C4 R, C6 N (with CG-4 mount).
Product Reviews Summary
Avg. Customer Rating:
 
4.5 stars
(based on 2 reviews)

[1 of 1 customers found this review helpful]

 
Only game in town for CG4.
By MinuteManVerified Reviewer from Alamosa, CO on 1/21/2008
Pros:
Keeps targets centered
Cons:
Can't use slow mo control, Position adjusting laggy
Best Uses:
Astronomy
Describe Yourself:
Casual/ Recreational
Bottom Line:
Yes, I would recommend this to a friend

The drive is the real reason for buying a GEM mount. With this drive, things stay put rather than drifting off even as the earth turns; you do have to do at least a rough alignment on Polaris though. The installation instructions were weak as they were on the scope itself but a little fiddling and I got it. You lose the ability to use the slow-motion control for RA but the declination slow motion control can be used via a manual clutch knob. Normally, I make fine adjustments using the control box; however, it is sometimes very slow to start moving. Large adjustments are made by using the mount's two clutch knobs to get it as close as possible. My unit also has a slide switch which is a little twitchy and sometimes requires jiggling to get it to turn on.

[1 of 1 customers found this review helpful]

 
Works like a charm.
By MichelleVerified Reviewer from Tampa, FL on 3/26/2007
Pros:
Accurate, Strong Construction
Cons:
None
Best Uses:
Astronomy, Astrophotography
Describe Yourself:
Casual/ Recreational
Bottom Line:
Yes, I would recommend this to a friend

These motors are the best investment I made for my new Omni XLT 150. They make your viewing sessions so pleasing. When sharing the night with others such as friends and family these motors are priceless. Allows me to even use 4m with a 2x barlow (highest magnification I have) and still stays right on taget while everyone takes a peak. Not to mention when viewing at this magnification and trying to use the manual knobs you get some vibration and shakiness. I highly recommened this to anyone buying a cg-4 mount.

Customer Reviews about the Celestron MD-4 Dual Axis Motor Drive with Hand Control for CG-4 Mounts and Advanced C4 R, C6 N (with CG-4 mount). at Adorama
Powered by PowerReviews
Copyright © 2008 Adorama All Rights Reserved. Do not republish contents.