By Jake from Las Vegas on 6/12/2008

First time I used this I saw a marked improvement in the cleanliness of my sensor. I've used other products, and my sensor is usually fairly clean, but with this it is now completely clean.

By Dr. J from Idaho on 5/8/2008

A little awkward to use at first but it gets the job done!

By Claudio Rio from Rio de Janeiro, RJ on 3/10/2008

After I learned the tricks the sensor got perfectly clean. A piece of advice: do not reuse a swab. I tried (cheap!) and it left a smear :-)

Once I used a brand new one, the smear was gone.

By AJ from Old Town, ME on 1/23/2008

If you haven't cleaned your sensor in months (or years) this is what you really need. This used with the cleaning fluid will remove the stubborn spots that a brush might not be able to dislodge.

By DC Photo Snob from Washington, DC on 9/26/2007

I recommend this method for sensor cleaning. It beats using a hurricane blower of the artic butterfly. The downsides are these: you need to be extremely careful when using, and the swabs can only be used for 2 passes (1 pass a side). But you've paid a lot for your digital camera so it's worth the investment.

[1 of 1 customers found this review helpful]

By Martin from NYC on 2/12/2007

Need delicate hands to use this product. Especially if you are touching the camera sensor with the dust swab. The dust comes back quickly. Invest in a good bulb blower, it works just as well, unless your sensor is really dirty, like you just photographed a construction site. Otherwise a [...] bulb blower will work wonders.

i use the swabs with smear away and vdust sensor liquid . The products work well.