Buy the Premier 10x12 Safelight on http://www.adorama.com Print This PagePrint This Page
Premier 10x12 Safelight image
 
(based on 1 ratings)
Brand: Premier
Located in: Film & Darkroom, Darkroom Aids, Safelights & Accessories
Premier 10x12 Safelight
Review Snapshot®
Avg. Customer Rating:
 
1 star
(based on 1 review)

[2 of 2 customers found this review helpful]

 
Very poor quality construction
By PeteVerified Reviewer from Dallas, TX on 9/5/2008
Cons:
Light leaks, Loose lightbulb socket, Poor Construction
Best Uses:
Printing
Describe Yourself:
Hobbyist/Enthusiast
Bottom Line:
No, I would not recommend this to a friend

Comments about Premier Premier 10x12 Safelight:

[...] product apparently in poor condition to start with. Screws holding ABS bezel to body driven through bezel, cracking it in three out of four locations. Bezel cracked through on one corner due to pressure from excess caulking extruded from interior where it was applied in an attempt to seal light leaks. Rivet used to attach lightbulb socket bracket was loose, had to jam a small piece of 2-ply mat board under bracket so it wouldn't flop around. Required multiple layers of gaffer's tape to seal light leaks at all four bezel corners and along part of one edge, along part of the edge where the body meets one of its endcaps, over the hole through the rivet, and around the power cord strain relief grommet. Other than that, works like a charm. Didn't try the cheezy (imho) filter, replaced it with a Kodak part. No idea if provided bulb worked, replaced it with a CFL bulb. [...]

Powered by PowerReviews
Copyright © 2011 Adorama All Rights Reserved. Do not republish contents.