Download our latest NYC retail store ad here for our weekly specials!

Shure BLX1288 Dual-Channel Wireless System with Headset Mic and PG58 Handheld Mic, J10: 584 - 608 MHz Frequency Band

SKU: SHBLX128830J MFR: BLX1288/PG30=-J10
Why Adorama?
Easy Returns, Fast Shipping, Trusted for over 35 years.

Need help? Call 800-223-2500 212-741-0052

$686.00 List Price

Our Price

$549.00 $22 per week
Free Expedited Shipping
Add to Wishlist In Stock

Protect your investment

About the Shure BLX1288

The Shure BLX1288 Dual-Channel Wireless System with Headset Mic and PG58 Handheld Mic (J10: 584 - 608 MHz) includes a BLX88 dual-channel wireless receiver, a BLX1 bodypack transmitter, a PG30 headset mic, a BLX2 handheld transmitter with a PG58 microphone and 4 AA batteries. The system is set to Shure's J10 frequency band and operates between 584 to 608 MHz.

Both the BXL1 bodypack transmitter and the BLX2 handheld transmitter have a 300' line of sight operation range with the BLX88 receiver. They are each powered by two included AA batteries that can provide up to 14 hours of operation. The BLX88 receiver features microprocessor-controlled internal antenna diversity that helps prevent interference and signal dropouts. Its one-touch QuickScan feature detects the most interference-free frequency and sets the channel to it for fast setup.

The PG30 headset mic has a wireframe body that can be adjusted for a comfortable fit. The PG58 features an on/off switch on the mic body and is tuned for vocal applications.

Shure BLX1288 Includes

  • Shure BLX88 Dual-Channel Wireless Receiver (J10: 584
  • 608 MHz)
  • BLX1 Bodypack Transmitter (J10: 584
  • 608 MHz)
  • BLX2 Handheld Transmitter with PG58 Microphone (J10: 584
  • 608 MHz)
  • 4 x AA Batteries
  • PG30-TQG Headset Microphone
  • Shure Warranty

Shure BLX1288 Features

  • PG30 Microphone: Cardioid polar pattern
  • PG30 Microphone: Adjustable boom for easy positioning
  • PG30 Microphone: Comfortable form fitting headband

Shure BLX1288 Specifications

Receiver: Output 2x XLR Output
2x 1/4" (6.35 mm) Output
Receiver: Output Impedance XLR: 200 ohm
1/4": 50 ohm
Receiver: Audio Output Level XLR Connector: -20.5 dBV into 100kohm Load (Reference +/-33 kHz with 1 kHz Tone)
1/4": -13 dBV into 100kohm Load (Reference +/-33 kHz with 1 kHz Tone)
Receiver: RF Sensitivity -105 dBm for 12 dB SINAD, Typical
Receiver: Image Rejection >50 dB, Typical
Receiver: Housing Molded ABS
Receiver: Power Requirement 12 to 15 V DC at 320 mA, Supplied by External Power Supply (Tip Positive)
Transmitter: Audio Input Level 0 dB Gain: -20 dBV Maximum
-10 dB Gain: -10 dBV Maximum
Transmitter: Gain Adjustment Range 10 dB
Transmitter: RF Output 10 mW, Typical (Varies by Region)
Transmitter: Power Requirement 2x LR6 AA Batteries, 1.5 V Alkaline
Transmitter: Housing Molded ABS
PG58: Type Dynamic (Moving Coil)
PG58: Polar Pattern Cardioid
PG58: Frequency Response 60 Hz to 15 kHz
PG58: Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
PG58: Sensitivity -53 dBV/Pa, (2.2 mV), 1 Pascal=94 dB SPL ( at 1 kHz)
PG58: Electromagnetic Hum Sensitivity 26 dB equivalent SPL in a 1 millioersted field (60 Hz)
PG58: Temperature Range -20 to 153deg.F (-29 to 57deg.C)
PG58: Relative Humidity 0 to 95%
PG30: Transducer Electret Condenser
PG30: Polar Pattern Cardioid
PG30: Frequency Response 60Hz to 18kHz
PG30: Dynamic Range (Typical) 92dB
PG30: Signal-to-Noise Ratio 61dB, 1kHz at 1 Pa
PG30: Maximum Input Sound Level 125dB
PG30: Power Requirements +5VDC, 10V max (pin 2 to pin 1)
PG30: Output Impedance 12k ohms at 1kHz
PG30: Output Connectors Mini TA4-Female
PG30: Pad No
PG30: Low Frequency Roll-Off No
Dimensions Receiver: 1.5x15x4.5" (40x388x116 mm)
Transmitter: 2.1x8.8" (53x224 mm)
PG30: Cable Length: 1.27m / 4.16'
Weight Receiver: 15.1 oz (428.07 g)
Transmitter: 7.7 oz (218 g)
PG30: 51.6 g (1.82 oz)
Feedback is top rated for customer service HACKER SAFE certified sites prevent over 99.9% of hacker crime. BBB Accredited Business