Sea & Sea YS-110a Dual Lighting Package for Point & Shoot Housing with 2 Sea Arm VII
Mfr. Part: 70037 SKU: SSYS110ADLPN
enlarge image
|
|
 |
We ran out of this Item Temporarily.
Please note: You can order this now and have us ship it as soon as it arrives.
We will not charge your card for any backordered items, until it is ready to actually ship. |
|
|
Item Includes
Sea & Sea 2 x YS-110a Strobe Head - 2 x Fiber Optic L-Type Cable - 2 x Sea Arm VII - 2 x Grommet & Nut - 2 x Mask - 2 x Hook and Loop Fastener Pieces - 2 x Diffuser - 2 x Arm Fixing Bolt - 2 x Silicon Grease - 2 x O-Ring Installed - Sea & Sea 1 Year Limited Warranty
|
Description
The Sea & Sea YS-110a dual strobe Package comes with everything you need to use 2 YS-110a strobes with your point & shoot digital camera. Using 2 strobes makes it easier to light large areas when using wide-angle lenses and allows creative use of light ratios when shooting macro, marine life and divers. The Sea & Sea YS-110a is a high-performance strobe that is designed to be compatible with most cameras. The automatic pre-flash function will adjust for most digital or film cameras.
The Sea & Sea YS-110a has a 12-step control dial, for precision manual manipulation of light output. The large dial is easy to handle, even when wearing heavy gloves. For point & shoot digital cameras, the strobe offers DS-TTL when fired with the built-in slave connected with the fiber optic cable. For cameras with hot shoes, the strobe will fire with a 5-pin Nikonos sync cord.
The strobe features a bright LED target light, recycle time of 1.9 seconds at full power and a guide number of 22 (ISO 100/m). The included Sea Arm VII is constructed with fiberglass-reinforced plastic resin offering a lightweight yet strong arm. With the included components, you can create a custom arm setup for your lighting needs. The tray is included.
Included are 2 Sea & Sea fiber optic L-type cables that connect the built-in sensor on a Sea & Sea strobe to the built-in flash on the camera. When the camera's internal flash fires the cable will fire the external flash. The L shaped connectors resist bending and have improved light conducting efficiency.
Included are 2 Sea & Sea strobe mask sets used to attach the included Sea & Sea fiber optic cables to many manufacturers underwater housings. The mask blocks the on-camera flash from exposing your subject. This prevents back-scatter. The grommets allow the cable to be attached in front of the on-camera flash so the light will trigger your external strobes. |
Features
 |
Everything you need to use two YS-110a strobes with your point & shoot digital camera |
|
When the camera's internal flash fires, the fiber optic cable will fire the external strobes |
|
The included Sea Arm VII is rigid to keep the strobe in the right position |
|
Three Xenon flash tubes for a broad 105 X 105° angle of coverage |
|
Bright LED target light in center of the strobe face. When the strobe fires, the LED light is interrupted momentarily |
|
Easy exposure with DS-TTL when used with built-in slave connected with fiber optic cable |
|
Recycle time of approximately 1.9 seconds with NiMH batteries at full power |
Specifications
| Configuration | Strobe head x2
Sea Arm VII x2
Fiber Optic L-Type Sync Cable x2
Mask Set x2 |
| Guide No. | 22 (ISO 100/m) |
| Coverage Angle | 105° x 105° |
| Depth Rating | 200' (60m) |
| Flash Modes | DS-TTL, manual, TTL with converter |
| Exposure Control | 12 step guide number control dial |
| Slave | Yes |
| Targeting Light | Yes, LED turns off when flash fires |
| Audible Signal | No |
| Color Temperature | 5600°K
With diffuser: 5100°K |
| Recycle Time | 1.9 seconds with NiMH batteries at full power |
| Flashes (Full Power) | Alkaline: 200
NiMH: 300 |
| Power Source | 4 AA batteries |
| Dimensions | 3.5 x 4.6 x 6" (88.90 x 116.84 x 152.40mm) |
| Weight (Land) | 1.5lbs (680.39g) |
| Warranty | Sea & Sea 1 year limited warranty |
| | |
|
|
|
|
|
|
Add to Wishlist
Email this Page
Print
