Closeout
SVAT Electronics 65' Extension Cable

SKU: SV11007 MFR: 11007

This item is no longer available.

SVAT Electronics 65' Extens: Picture 1 regular

About SVAT Electronics 65' Extens

The SVAT Electronics 65 ft Extension Cable can be used to extend the reach of your SVAT cameras. Compatible with new SVAT DVR kits starting with 110XX and new cameras. This is a 65 ft siamese cable with video and power connections.

SVAT Electronics 65' Extens Specifications

Cable Length
65' / 19.81 m
Mfr #
11007
SKU
SV11007
Q&A

Questions & Answers Powered by TurnTo®

Questions about this item:

Carol M  I have the 11002 SVAT cameras and need extension cords. Will the SVAT 11007 extention cable cord fit it???? If so I need 4 of them.
AARON C  SVAT made 4-pin DIN connection camera and standard BNC connected cameras. Make sure you are getting the correct cable for the type of cameras. If your cameras have both a BNC connector and a power connector on them and your preexisting cable has the same then yes it will work. But just make sure.
Carol M  Aaron, you evidently DID NOT look at the pictures of the ext cords/camera cords, that I sent you. You try to match them up!!!! I showed you the picture of BOTH ends of the ext. cords vs. camera cords. Please look at the ends of the ext. cord and match them to the camera cords. If you can do it, I'll nominate you as employee of the year... Carol
GEORGE D  can this cable set repalace a sew33 wire audio/video cable set ?
Andrew R  Unfortunately no, I believe the cabling for the SEW33 requires RCA connectors, this cable uses BNC.
GEORGE D  ANDREW ON THE CABLE THAT I HAVE ONE END HAS A MALE/FEMALE AND THE OTHER END HAS A MALE/BNC THINK YOU CAN HELP ME OUT
Carol M  I have the 11002 SVAT cameras and need extension cords. Will the SVAT 11007 extention cable cord fit it???? If so I need 4 of them.
AARON C  SVAT made 4-pin DIN connection camera and standard BNC connected cameras. Make sure you are getting the correct cable for the type of cameras. If your cameras have both a BNC connector and a power connector on them and your preexisting cable has the same then yes it will work. But just make sure.
Carol M  Aaron, you evidently DID NOT look at the pictures of the ext cords/camera cords, that I sent you. You try to match them up!!!! I showed you the picture of BOTH ends of the ext. cords vs. camera cords. Please look at the ends of the ext. cord and match them to the camera cords. If you can do it, I'll nominate you as employee of the year... Carol
See more questions and answers
top
Share this item:
Adorama.com is top rated for customer serviceHACKER SAFE certified sites prevent over 99.9% of hacker crime.
Feedback