The Technical Pro HILOW15 is a 6-Way Cabinet Speaker w/ Steel Grill. This beast of a speaker system is a combination of Technical Pro's Professional Tweeter Box and 15" Subwoofer. If you are a sound designer, engineer or are setting up sound for a club, studio setting or performance venue no doubt you have a lot of pieces to your system. Technical Pro is offering this combination to ease the worry of putting the whole puzzle together. Built-to-last and providing a highly professional audio sound, these two units fit together like peanut butter and jelly! The total power output is 1200 watts of peak power!
The bottom speaker is a 15" Passive Subwoofer System. The subwoofer pushes out 900 watts of peak power. Housed within the built-to-last casing is a 15" Aluminum frame, 2.5" voice coil, 50 oz. magnet. This equals POWER! The sub will provide most any venue with the bone shaking thump that you crowd is hungry for! If you are a DJ and are trying to get that low end bump in the club or are a sound or studio designer and wish to round out your sound and fill in the lacking low end frequencies, this is for you!
The top speaker box is a Professional Tweeter Box. The tweeter box is built with an advanced sturdy design that will work efficiently in the harshest conditions in a club or arena. The protective box holds four tweeters and one 5" x 15.5" horn. The four tweeters housed in the box design contain a piezo design. Each tweeter contains a piezoelectric crystal which when flexed produces a flawless output. The tweeters are wrapped around the horn which is positioned in the center providing a long and clean throw of audio. The tweeter box is able to push out 300 watts of peak power. Audiophiles and engineers will agree that a clean, powerful throw of high frequency is a must have in any audio environment. These are the frequencies that give the song its shine and if your music is not properly translated, you will be stuck in the muddiness of poor acoustics.
Transporting, setting up and breaking down the HILOW15 system is a piece of cake! Place the subwoofer on the floor and connect the tweeter box using the single pole mount. Connect the audio the subwoofer your system using the bare wire terminal inputs and you're all set! Yes, it's that easy! The high frequency audio from the tweeter box combined with the low end thump of the sub will shake the walls of any large venue or performance space.
|Frequency response||45Hz - 20kHz|
|Subwoofer: Woofers||15" / 38.1cm|
|Subwoofer: Voice coil||2.5" / 6.35cm|
|Inputs||1/4", Bare Wire|
|Mid: Horn||5x15" / 12.7x38.1cm|
|Mid: Voice coil||1.5" / 3.81cm|
|Sensitivity||95 ±2dB (1W at 1M)|
|Dimensions||Tweeter cabinet: 18x12" / 45.72x30.48cm
Subwoofer cabinet 20.5" / 52.07cm
|Weight||53lbs / 24.04kg|