TRENDnet LMR200 2m Reverse SMA to N-Type Cable

See all TRENDnet items

Our Price

Buy more and save
Quantity Discount

The quantity discount will be reflected in your shopping cart

About TRENDnet LMR200

The TRENDnet LMR200 Reverse SMA to N-Type Cable extends your wireless Antenna up to 2 meters to provide optimal placement for your antenna outdoors. Connect business networks from building to building wirelessly or provide wireless Internet access for hot spot applications! This cable makes wireless communication possible by providing low loss communication between your access point and antenna.

TRENDnet LMR200 Features

  • Wi-Fi Compliant with 2.4GHz 802.11 b/g & 5GHz 802.11a Devices for extending wireless networks
  • Reverse SMA Female to N-Type Male Connector
  • Optimal placement of your existing Wi-Fi Device permits you to maximize its wireless performance
  • Flexible outer conductor allows the tightest bend radius available for any cable of similar size and performance
  • Provides flexible Low-loss communication for wireless antenna
  • 50dB RF Shielding is 10 dB greater than typical single shielded coax (40 dB)
  • Multi-ply bonded outer foil conductor is rated conservatively at > 90 dB
  • Weatherproof cable design for outdoors exposure with best materials for UV resistance
  • Polyethylene jacketed cable designed for outdoor use
  • Easy and quick deployment into a WLAN environment

TRENDnet LMR200 Specifications

Cut-off Frequency
39 GHz
Velocity of Propagation
Dielectric Constant
Time Delay
1.22 nS/ft (4.02 nS/m)
50 ohms
24.5 pF/ft (80.3 pF/m)
0.061uH/ft (0.20 uH/m)
Shielding Effectiveness
> 90 dB
DC Resistance
Inner Conductor: 5.36ohms/1000ft (17.6 ohms/km)
Outer Conductor: 4.9 ohms/1000ft (16.1 ohms/km)
Voltage Withstand
1000 Volts DC
Jacket Spark
3000 Volts RMS
Peak Power
2.5 kW
Operating: -40deg. C - 85deg.C (-40deg.F-185deg.F)
Storage: -70deg. C - 85deg.C (-94deg.F-185deg.F)
Inner Conductor (Solid BC)
0.044" / 0.11cm
Dielectric (Foam PE)
0.116" / 0.29cm
Outer Conductor (Aluminum Tape)
0.121" / 0.30cm
Over Braid (Tinned Copper )
0.144" / 0.36cm
Jacket (PE)
0.195" / 0.49cm
Bend Radius: Installation
0.5" / 1.27cm
Bend Radius: Repeated
2" / 5.08cm
Bending Moment
0.2 ft-lb (0.27 N-m)
Tensile Strength
40lbs / 18.14kg
Flat Plate Crush
15 lb/in. (0.27 kg/mm)
115g / 4.05oz
Share this item: is top rated for customer serviceHACKER SAFE certified sites prevent over 99.9% of hacker crime.