Shure WH30XLR Headworn Cardioid Condenser Microphone with a 1.5 m (5 ft.) Cable & In-Line Preamplifier.


This item is no longer available.

Shure : Picture 1 regular

About Shure

The Shure Model WH30XLR is a light yet rugged headset microphone. Designed for vocalists and instrument-playing vocalists, the WH30 utilizes a high quality electret-condenser cartridge suitable for all applications where mobility, comfort, low microphone-visibility, and high sound quality are required. Because of its cardioid (unidirectional) pickup pattern, the WH30 provides isolation from extraneous sound sources and high gain-before-feedback.

The wireframe and gooseneck adjust to any head size and shape. An integrated elastic CROAKIES®. headband comfortably pads and secures the headset. The WH30 is supplied with two snap-on windscreens, clothing clip, storage bag and cable-management device.

The WH30 headset microphone is a perfect fit for those who desire total freedom of movement and need the high-quality audio of a condenser microphone.

WH30XLR: For wired applications, the WH30XLR is supplied with a 1.5m (5 ft.) hi-flex cable and high quality mic preamplifier (RPM420) with a three pin XLR connector. The RPM420 preamplifier requires phantom power from any 11 52 V source.

Shure Specifications

Condenser, electret bias with integrated preamplifier
Vocalists and instrument-playing vocalists,
Frequency Response
40 to 20,000 Hz
Polar Pattern
Unidirectional (cardioid)
Rated 150 ohms. (actual) (Tolerates loads as low as 150 ohms. with reduced clipping level)
Output Level
(at 1 kHz; 0 dB = 1 V/Pascal) -54.5 dB (1.9 mV)
Cable Connector XLR
Positive sound pressure on the diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output connector.
Headset and cord: 60 g (2.1 oz) Preamplifier: 99 g (3.5 oz)
Power Requirements
Recommended Operating Voltage : 11 52 VDC Phantom power
Mfr #
Share this item: is top rated for customer serviceHACKER SAFE certified sites prevent over 99.9% of hacker crime.