Viking Electronics

Viking Electronics E-10A Handsfree 2-Way Entry Speaker Phone, Vandal-Resistant

Usually ships in 7-10 Business Days.
Your card will only be charged once item ships.
Why Adorama?
Easy Returns, Fast Shipping, Trusted for over 35 years.

Need help? Call 800-223-2500 212-741-0052

About the Viking Electronics E-10A

The Viking E-10A is a telephone line powered entry phone designed to provide two-way handsfree communication. It function identically, when the "Call" button is pressed, the E-10A will come off-hook and will remain off-hook until a CPC signal is detected, the programmed timeout has elapsed, a busy signal is detected, or the call goes silent, making the unit automatically disconnect.

The E-10A can be connected directly to a C.O. line or analog PABX/KSU station when programmed as a ringdown circuit. One to four E-10A speaker phone can share an existing phone line in a house or small business when used with a Viking C- 200, C-250 or C-2000B Entry Phone Controller.

Viking Electronics E-10A Features

  • Alternate action call button to place or cancel a call
  • Intelligent call progress detection for automatic hangup on CPC, silence, busy signal, or time out
  • Telephone line powered
  • Weather resistant features: mylar speaker, gaskets, internally sealed push button switch, UV stable exterior, enamel coated PCB
  • IP66 Ingress Protection Rating
  • Adjustable microphone and speaker volume
  • Programmable maximum call length
  • Selectable auto-answer feature allows remote monitoring
  • Two way handsfree communication
  • Programmable VOX (mic/speaker) switching speed
  • Applications: Door or gate communication, business delivery entrances
  • Applications: Use with a Viking C-200 or C-250 to control an E-10A on a single line
  • Applications: Use with a Viking C-2000B to control 1 to 4 E-10A and door/gate control on a single phone line
  • Applications: Provide unique front and back door chimes and paging when used with a Viking SLP-1, SLP-4 and C-2000B
  • Applications: Residential, commercial and industrial door security
  • Applications: Use with a Viking K-1900-5 or K-1900-30 for automatic speed dialing on telephone lines or analog PABX/KSU station ports
  • Applications: Use on any analog PABX station port with programmable ringdown capability

Viking Electronics E-10A Specifications

Power Telephone line powered (18 VDC/20mA minimum)
Environment -34deg. C to 65deg. C (-30deg.F to 150deg. F) with 5% to 95% non-condensing humidity
Speaker Volume Approximately 70db maximum at 1m
Ring Voltage 25V AC RMS minimum
CPC Disconnect Time 300ms minimum
REN 0.8A
Connections (2) gel-filled butt connectors
Dimensions Overall: 5 x 5 x 2.25" / 12.7 x 12.7 x 5.71cm
Feedback is top rated for customer service HACKER SAFE certified sites prevent over 99.9% of hacker crime. BBB Accredited Business