The Zacuto Z-Finder Pro 2.5x for 3.2" screens is another one of Zacuto's Optical Viewfinders that allows small bodied DSLR cameras with 3.2" screens to have the correct form factor for video. It offers 2.5x focusable magnification (3x is available), a 40 mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3" LCD screens.
The diopter allows you to dial in the focus to match your eye. If you need extra focal point you can use the Z-Finder Extender Frames. The 2.5x is recommended for customers who are near sighted or prefer a smaller magnification. The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames). These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further away from the LCD screen for people who are farsighted.
The Z-Finder Pro uses Gorilla Baseplate and Z-Finder mounting frame to mount to the camera. (The Z-finder Mounting Frame can also be attached to DSLR Baseplate). The Gorilla Baseplate attaches to the bottom of your camera using a 1/4-20" screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it.