Bebob Engineering ML-120 Rouge Hot Swap Adapter for Red One Camera

Bebob Engineering

About Bebob Engineering ML-120

The ML-120 is a Hot Swap Adapter for the Red One Camera. It allows to swap the battery without interruption of the camera powering. When the battery runs empty, the ML-120 will take over the powering of the camera for 2 Minutes, giving a simultaneous a visible alarm.

The ML-120 replaces the Standard V-mount on the RED Drive cradle, or other 3rd party battery mounts. Additionally, it features a 12 V DC D-Tap port, secured by a 5 A self-resetting fuse. After use the ML-120 self-charges from the regular camera battery and will be fully charged within 40 minutes, the capacity of the ML-120 allows for 5 x 2 minute run times, with its self-charging system the ML-120 requires no further operator maintenance or interaction.

When used with Red compatible batteries (RED Block, Bebob Engineering) the ML-120 transfers battery-data to the screen of the camera to display remaining battery capacity information.

Bebob Engineering ML-120 Features

  • 2 Step empty battery-alarm
  • 20 Wh built-in power-buffer
  • Automatic switching by empty batteries to allow continuous powering of the camera
  • 12V D-Tap Port with self-resetting 5A Fuse
  • High-End V-Mountplate to avoid possible poor contact between battery and camera

Bebob Engineering ML-120 Specifications

Output Lemo 6 pin
14.8 V, Max 10 A
Output D-Tap
14.8 V, Max 5 A
Buffer Capacity
1.5 Ah, 22 Wh
Max. charging amperage
0.65 A
Max. discharging amperage
10 A
Dimensions (L x W X H)
5.4 x 3.1 x 1.7 in (139 x 79 x 45mm)
520 g / 18.34 oz
Share this item: is top rated for customer serviceHACKER SAFE certified sites prevent over 99.9% of hacker crime.