 |
Extensive timing capacity...from .1 second to 59 minutes 59.9 seconds |
|
Ability to count down or up |
|
Ability to function as a stop watch |
|
Display made up of 5 LED's...1/2' inch to report minutes, seconds and tenths of a second |
|
Automatic reset feature with the capability to repeat a cycle over and over by pushing a single button |
|
LED lights indicate which outlet is on |
|
LED light indicator for count down/up function |
|
Display intensity options: 3 brightness levels / Off |
|
Variable audio signal: |
|
One second long tone at end of cycle |
|
Warning tone at 30 second intervals |
|
One second interval metronome |
|
No tone |
|
2 outlets: Cycle on or off time/Function under timer control or independently |
|
2 output jacks...provide logic level compatible signals parallel with the corresponding AC outlets |
|
2 memories, one to control each outlet |
|
Can function as an intervalometer...alternate switching of outlets |
|
Each memory can switch a single outlet independent of the other outlet |
|
Both memories can be switched simultaneously |
|
Auto Start...automatically recycles memory |
|
Settings retained in memory until changed...even after the timer is turned off |
| Time Range | .1 second to 59 minutes 59.9 seconds
in minutes, seconds and tenths of a second |
| Accuracy | Better than ±.015% @ 10 seconds (25°C ambient, no load)
Repeatability: + .005% @ 10 seconds (25°C ambient, no load) |
| Max. Lamp Load | 500W |
| Max. Resistive Load | 1000 W |
| Max. Motor Load | 1/4 HP |
| Number of Outlets | 2 Function under timer control or independently |
| Audible Options | 4: One second long tone at end of cycle
Warning tone at 30 second intervals
One second interval metronome
No tone |
| Memory | Dual Memory together or independent
both can be switched simultaneously
Memory retained until changed even after shut off |
| Display | 5 1/2' inch LED's
3 brightness levels/ Off |
| Auto Reset | Yes |
| Foot Switch | Yes |
| Voltage | 100-130 VAC, 50/60 Hz |
| Housing Material | Plastic |
| | |
