Customers most agreed on the following attributes:
Comments about Flashpoint Flashpoint II Grid Set, for 7 Inch Reflectors. Consists of 1 each: 10°, 20°, 30°and 40° Grids.:
My grids were too small for the Flashpoint series II monolight. The grid is about 6 1/2" and the monolight reflector is 7 3/4" so that the grid has to be placed too far down into the reflector. The only way to position it is to remove the modeling lamp from the flash.
Comments about Flashpoint Flashpoint II Grid Set, for 7 Inch Reflectors. Consists of 1 each: 10°, 20°, 30°and 40° Grids.:
These work great and I would highly suggest getting one set for each light you have.
Comments about Flashpoint Flashpoint II Grid Set, for 7 Inch Reflectors. Consists of 1 each: 10°, 20°, 30°and 40° Grids.:
Very good product for the money, I am going to get one more set, so I can use two similar grids at the same time with my two flash units.
Easy to use, if you have perfectly round reflector on your flash unit, one of mine reflectors has a little dent so I struggled to put grid on first time.
Comments about Flashpoint Flashpoint II Grid Set, for 7 Inch Reflectors. Consists of 1 each: 10°, 20°, 30°and 40° Grids.:
Grid set was better than expected. Fits perfectly on the reflectors of the 620M's. A proper case would have been a nice addition.Each grid has a label to recognize which grid you are using. Overall very nice accessory.
[1 of 1 customers found this review helpful]
Comments about Flashpoint Flashpoint II Grid Set, for 7 Inch Reflectors. Consists of 1 each: 10°, 20°, 30°and 40° Grids.:
These grids are a great value and are sturdy. The only problem I had was that the reflectors that came with my Flashpoint II's monolights did not accept these grids. [...]