A ring light is a flash unit that has special characteristics that are optimized for specific and diverse kinds of shooting such as macro, scientific applications…and fashion photograhpy.<\/p>\n
Doctors and scientists use ring lights to provide even illumination for close-ups shot with macro lenses, and many amateurs use them to shoot stamp or coin collections and the like. We know of a few pros who use ring lights to shoot architectural details and high-fashion portraits.<\/p>\n
The ring light\u2019s defining feature is its circular, or doughnut-shaped flash tube and reflector. The reflector housing is generally threaded to fit regular series filters or the threads on SLR lenses.<\/p>\n
Ironically, the ring light violates the general rule of lighting placement. Instead of being held away from the lens in order to produce better modeling, the ring light’s axial position is intended to produce no noticeable shadows and, therefore, little modeling. And sometimes, that’s exactly the kind of light you need.<\/p>\n
First, let’s look at the different ring lights you can choose from.<\/p>\n
<\/p>\n
Power and size<\/strong> Hence, 100-105mm macro lenses, which have longer working distances than 50-60mm macros, work better for close-up shots with ring lights. They also give live subjects like this honeybee more room, so you\u2019ll be less likely to spook them. You don\u2019t want to bug a bee!<\/p>\n Power is the main thing to consider when you’re shopping for a ring light. Many small units, powered by AA cells, are best suited for close-up work. Typically, reflectors are about 3-4 inches in diameter. With a ring light of this size, you can photograph objects as close as two inches from the lens.<\/p>\n Larger lights are available in both battery and AC-powered units. Power ranges from 25 to 200 watt-seconds. Reflectors on larger ring lights have a four-to five-inch diameter, and you can shoot a subject as close as one foot from the camera lens<\/p>\n Studio ring lights<\/strong> \n Relatively powerful ring lights, delivering from 40 to 200 watt-seconds or more, are occasionally used in fashion photography for special-effect lighting. Ring lighting works well with some kinds of clothing, such as spandex. The frontal illumination can highlight threads in the material. However, you’ll get little modeling on your model’s face. You may want to accentuate the face makeup, to compensate for this.<\/p>\n Red-eye is another likely problem when photographing people with ring lights. Red-eye is more evident if the existing-light level is low, so that the pupils of your subject\u2019s eyes are large. Have the subject turn his or her eyes slightly away from the camera lens to reduce the chances of getting red-eye. Then again, a few pops of a decent-sized ring light will shrink the subject\u2019s pupils pretty quickly. When shooting portraits, you can also handhold a ring light off-camera, just like any other flash. The results are similar those you would get with any regular diffused off-camera flash unit.<\/p>\n Scientific and industrial uses<\/strong> If you use a single flash off to the side of your camera, some of the overlapping parts of a complex subject can cast obscuring shadows on other parts. A second flash, on the opposite side, would lighten these shadows, but may cause other problematic shadows.<\/p>\n A simple subject\u2014one with minimal depth and no overlapping parts\u2014could perhaps be photographed perfectly well with the classic two-angled-flash setup, but a complex subject, such as an assembly of gears like the examples shown here, or an electronic wiring harness, call for a different approach. This is where a ring light really comes in handy.<\/p>\n Because a ring light emits a nearly uniform cone of light that’s essentially on axis with the camera’s view, no part of your subject will cast an annoying shadow visible from the camera position. Even relatively deep enclosures, like those common in electronics assemblies, are uniformly lit so all the working parts are clearly distinguishable. Deep enclosures can be difficult to light by any other means.<\/p>\n Actually there will be a halo-like shadow around the subjects as seen on this photo of a pencil, but the shadow will be very faint due to the much greater intensity of the direct light.<\/p>\n Ring lights don’t work very well on glossy surfaces. You’ll get too much glare from the flash tube’s reflections. In such cases, off-camera flash may be a better choice. Alternately, you could opt to tilt the subject slightly so the glare is moved to the side, as shown in these photos of a toy Volkswagen Beetle.<\/p>\n Small-object photography<\/strong> The flat lighting effect is equally suitable for shooting on black-and-white or color. The lighting ratio is virtually 1:1. The illumination appears shadowless, and you’re not likely to exceed the contrast limitations even with digital capture or narrow-latitude color slide film.<\/p>\n You can modify ring lighting somewhat by covering portions of the flash head with black tape to block off some of the light. This will partially eliminate the symmetry of the lighting to give slightly more directional effect. Indeed, some close-up flashes, like the Nikon SB-29, (which aren\u2019t technically ring lights but give similar results) use this concept. They feature two flashtubes mounted on opposite sides of the lens.<\/p>\n You can shut off or partially cover either flashtube to enhance contrast, as well as rotate the flash head to direct the light from above or below the subject. The sb29s seen here is similar to early models of the olympus ring flash.<\/p>\n \nExposure correction<\/strong> One answer to this problem is a ring flash with through-the-lens (TTL) exposure control. Some 35mm SLR makers such as the Olympus Nikon, Canon and Pentax, offer their own close-up flashes with TTL exposure control. After-market suppliers like Sunpak, Vivitar and others offer similar units.<\/p>\n Because the photocell reads the light actually passing through the camera lens, it automatically compensates for the dimmer image given at very close subject distances. You should test and bracket to get the best results. An automatic exposure-compensating system relieves you of most concerns about exposure, leaving you free to concentrate on the subject and the picture. And if you have a digital camera, you can check results in the LCD screen.<\/p>\n To make focusing easier in dim light, some ring lights have built-in modeling lights. Some are small incandescent lamps built into the head. Other flashes briefly fire the flashtube at low power, similar to the redeye-reduction systems in point-and-shoot cameras.<\/p>\n","protected":false},"excerpt":{"rendered":" A ring light is a flash unit that has special characteristics that are optimized for specific and diverse kinds of shooting such as macro, scientific applications…and fashion photograhpy.<\/p>\n","protected":false},"author":178,"featured_media":17744,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[21,639,17818,645,646,652,5],"tags":[762,728,899],"class_list":["post-7203","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-gear","category-how-to","category-livestreaming-youtube","category-photography-645","category-tech","category-gear-652","category-video","tag-lighting-762","tag-macro-728","tag-ring-flash-899"],"acf":[],"yoast_head":"\n
\nThe beam angle of most ring lights is 60\u00b0 to 70\u00b0. This is wide enough for use with a 35mm wide-angle lens on a 35mm camera, but generally you would want to use a longer lens for close-up work. If you get too close to the subject with any ring light, its illumination will be uneven–the center will be darker than the outer area.<\/p>\nLarger units can be used for photographing small machinery. They can even be used for lighting individual or group portraits\u2014if this kind of flat illumination suits your specific needs. If your lens is too small to fit the thread of a larger ring flash, you can use a step-up adapter.<\/p>\n
\nThe largest ring lights are studio units that handle from 400 to 2400 watt-seconds of power. Generally, they are AC-powered, but can be powered on location with portable generator. The reflectors are as large as 16 inches in diameter. They can be mounted either on the camera or on a light stand directly in front of the camera so the lens looks through the ring light.<\/p>\n\n
<\/div>\nFashion photography<\/strong><\/p>\n
\n
<\/div>\n
\nProfessional photographers are frequently called upon to produce detailed photographs of machinery or apparatus with complex, overlapping parts. Medical and biological photographers are often required to deliver images that have the greatest possible amount of unobstructed detail and information.<\/p>\n<\/p>\n
<\/p>\n
\nRing lights are ideal (and best known) for close-up photography of very small objects, including insects and botanical specimens. These lights are particularly useful when you’re photographing on location. The ring light always aims itself\u2014wherever you point the camera, the light’s right there, pointing in the right direction.<\/p>\n<\/p>\n
\nCalculating flash exposure in small-object photography is not as simple as it is in regular flash photography. As you get closer to your subject, the effective aperture of your lens becomes smaller. As a result, the light reaching the film or image sensor is weaker, so you’ll need to select a wider aperture to get the correct exposure.<\/p>\n