Ikelite Underwater Video Housing for Sony HDR-SR7 & HDR-SR8 Camcorders, Rated Down to 200'.

Molded of clear polycarbonate to provide seamless construction and corrosion proof performance. This "Clearly Superior" design provides full view of the camcorder, control functions, and back "O" ring seal for assurance the system is safe. Maximum operating depth is 200 feet (60 m).

Housing measures 11" (27cm) wide with the removable handle bar attached; 8" (20cm) high including the removable base; and 8" (20cm) deep including knobs and port. Weight above water is approximately 9 lbs. (4 kg) for easy packing, and very slightly negative in saltwater for stability and comfortable handling.

The Base removes instantly with a unique toggle clamp for traveling or attaching of the optional Pro Video-Lite 3 battery pack. The handle assembly detaches from the housing by removal of just two nuts for packing.

The housing port is threaded allowing the use of optional external 67mm threaded wide-angle conversion lenses including the #6420 Ikelite W-20, Epoque DCL-20, and Inon UWL-100 Type II.

Controls for the Camera Control Dial, Manual Button and the LCD Screen Touch Pad provide full access to setting white balance and white balance shift.

The included removable UR/Pro filter enhances red tones in tropical blue water settings with available sunlight at depths up to 80 feet (24 m). An accessory green water filter #6441.81 is also available for color correction and more natural tones in green water settings.

Sony NP-FH40, FH50, FH60 & FH70 batteries are accommodated.

A magnified Super-Eye Viewfinder is provided for enhanced viewing through a diving mask. The camera's LCD monitor can be viewed from the rear of the housing using the External Mirror featured on the side of the housing.

Image Reversing Circuitry built into the housing flips the LCD monitor's image horizontally so that it appears correct left-to-right when reflected in the mirror. The External Mirror is hinged to fold against the housing side for travel.