Kino Flo Imara S6 DMX Yoke Mount, 120VAC

Kino Flo Imara S6 DMX Yoke Mount, 120VAC Features

• TV Studio Friendly: Lighting directors will appreciate the even field of illumination and high light level along with the integrated DMX lighting controls. The fixtures can be controlled from a lighting desk without the need of conventional dimmer packs
• Cinematographers Appreciate the Imara: Cinematographers welcome the Imara to their fold for its compact size and high output. It draws half the amperage of a Kino Flo VistaBeam 600 at about the same effective light output
• DSLR Friendly: DSLR still photographers who are now working with moving image capture will appreciate the cool operation & high light level in a concentrated, evenly lighted area. The beam spread can be further controlled through the use of honeycomb louvers to create a very cosmetic soft edged spot
• Softcut Reflector: The Imara S10 DMX utilizes a SoftCut reflector designed to emit a bright, narrow, even spread of soft light. The edges of the beam are distinct. This concentration is useful in TV studios and photographic applications where the subject is localized
• Rigging Options: Unique accessory holder brackets are also used to enable for 4 point rope hangs for specialty rigging applications
• Gel Frame: The Gel Frame comes with Gel Clips to fasten the gel to the frame. It fits into the fixture's accessory holder brackets
• Heat Management Design: The physical heat of the lamp or the buildup of heat within the fixture will directly influence the color temperature and lumen performance and lamp life. The Imara's reflector is properly ventilated near the cathodes (hottest spot) of the lamps
• Long Lamp Life: Lamp life of a fluorescent lamp for the television and motion picture industry is determined more by its lumen maintenance than by its actual burn time. All fluorescent lamps display a lumen depreciation curve
• DMX Control: Manual Lamp Switching and Dimming: There is an important practical advantage to the long lived lamps, as well. Once a fixture is rigged high up in the studio grid, it can be very difficult to maintain the fixture once the set is built below
• Energy Efficiency: As with all Kino Flo products, the Imara is energy efficient compared to conventional studio fixtures. The Imara S10 puts out about same light output as a VistaBeam yet draws only 5.2 amps at 120V AC (2.6A 230V AC)
• SoftCut Reflector Design: Tungsten softlights radiate light in a broad field. Flags, cutters, skirts or louvers are needed to concentrate the light into specific areas. With its unique characteristics and SoftCut reflector design
• Energy Savings Calculations: With the push to reduce fossil fuel consumption, TV studios are looking at cooler, more efficient lighting systems to reduce costs and save energy. One of the most important values is Btu/kWh