Novatron D1000 - 3 head Kit 1000 W/S Digital Pack with 3 heads, 2 stands, 2 umbrellas, 6101 hard case & sync cord

The D1000 is an all digital 1000ws fan cooled pack, fully microprocessor controlled and has a variable output in 1/10th increments over its entire 4 stop range. other features include 1//2 inch tall 4 digit LED display, misfire alarm, Sync Voltage compatible with most Digital camera.

The 2100-C Standard Flashhead does not contain any controls to ratio the power or the modeling light. It comes equipped with a 1000 watt sec. flash tube (color corrected to 5500'K), 100 watt tungs10 modeling lamp, 15' power cord, and a mounting bracket with knobs for securing the bracket to a light stand and attaching an umbrella. This bracket also has a universal adaptor base which allows it to a standard 5/8'' stud.

The 2140-C 3-Way Switching Flashhead contains the controls to operate at full power or ratio the power and the modeling light down 1 stop (-1) or 2 stops (-2). Comes equipped with a 1000 ws flash tube (color corrected to 5500'K), 100 watt tungsten modeling lamp, 25' cord, and a mounting bracket with knobs for securing the bracket to a light stand and attaching an umbrella.

The 7045W is a 45" white reflective umbrella. It is 27-1/2" long and opens to a 45" diameter.

The 5010 Light Stand features all aluminum construction for durability, and collapses to a length of 24-1/2", This is considered a medium duty stand. It can easily be adjusted from 25"-10' by the means of 5 telescoping sections which are secured by thumb screws. The top section has a 5/8" diameter stud for mounting of flash equipment.

The 5003 BackLight Stand is a multifunction light stand that can hold 2 flash heads (or Monolights) at once! The top mounting stud and the removable leg mounting stud are 5/8' machined brass (see mounting stud closeup view above). The removable stud has machined threads on each end. 1 end mounts to the leg, and the other has a 1/4-20 thread. The non-removable top stud also has a 1/4-20 thread. The 1/4-20 threaded ends come equipped with removable protective plastic press-on sleeves.

The stand extends to 3 feet, collapses to 20", and is designed to allow mounting of 1 head on top and another to the foot at the same time. The center 2 telescoping sections can even be removed for tight situations making the stand then ONLY 4" TALL! A 4046 Adapter is needed when mounting older 3/8" stud mount Novatron heads on this stand.

The MI-001 Sync is 15' long with a household plug on 1 end and PC connector on the other end.

The case is custom formed from a high impact copolymer plastic and has a metal rim with hinges, 3 clasps, and a carrying handle.

This case has provisions for 1 Power Pack, 4 Flashheads, and also room to store umbrellas and light stands. The case measures 35-1/2" L x 16" W x 9" H.

The MI-003 Heavy Duty AC power cord is 6'7" long and used on the 1000VR and 1500VR Power Packs. The Heavy Duty AC power cord is rated at 15A-125V.