Viking LSD-2 Line Sharing Device with Inbound Switching Capability
SKU: VIKLSD2
This item is no longer available.
Share:
Overview
Compare
Specs
Protection
About Viking LSD-2
The Viking LSD-2 Line Sharing Device allows the user to share an existing phone line with an emergency phone or other priority alarm device. This can save hundreds of dollars a year over leasing a dedicated phone line. The LSD-2 can be used on any C.O. line or analog PABX/KSU station.
An outbound call on the DEVICE 2 (PRIORITY) port takes priority over a call in progress on the DEVICE 1 port. Any call in progress on the DEVICE 1 port will be disconnected for 2 seconds, returning dial tone to the DEVICE 2 (PRIORITY) port. A busy signal is then sent to the DEVICE 1 port.
For incoming calls, the LSD-2 can route calls to the DEVICE 2 (PRIORITY) port using Caller ID, Distinctive Ring, or Quick Call Back. All other calls will be routed to the DEVICE 1. Alternatively, the LSD- 2 can be set up so that all inbound calls are routed to the DEVICE 2 (PRIORITY) port.
Viking LSD-2 Features
- Routes both incoming and outgoing calls
- Allows an Emergency device to share a phone line with other devices (fax machines, phones, modems)
- Gives priority to the Emergency devices
- Incoming calls routed to one of two ports by Caller ID, Distinctive Ring or Quick Call Back
- Status LED displays mode of operation
- Can store up to 12 Caller ID numbers
- Provides a busy signal to the phone port when an Emergency device is in use