A dry, synthetic, easy-to-use, pressure sensitive adhesive. Allows repositioning of artwork until bond is made permanent. Just unroll PMA adhesive side up, position artwork, and cut the PMA flush or leave a narrow border for trimming. Place the artwork face up on the release paper, protect with slip sheet and rub with a squeegee or roller to transfer adhesive to back of the artwork. Remove the liner and position the adhesive coated artwork on the mounting surface. Cover with a slip sheet and rub with squeegee or use the C-35 PMA applicator for a permanent bond.
Reviewed by 4 customers
I use this product all the time for mounting paper and making comps of brochures and other 2-sided printed pieces.
Best product for the job. Dont turn to glues. This gives a better handle when working with flat surfaces. Very Strong too!
This is excellent material for photographs. When used on mount boards, it works much better than spray adhesives. Be carful not to get this material on the front of the photographs. They say this is reposition-able, but don't believe it! The only negative thing about this product, it the price. At Adorama, the price is about as good as it gets.
Adhesive is easy to work with using just the plastic squeegy, but much better bond with a cold mount roller machine. It is important to eliminate any adhesive "pills" from the edges which might transfer to the front of the print or create a bump under the surface.