
Review Summary
2019-04-30T06:53:58
I have been using this product for several years and it is easy to use and does a great job!
ERIC P.
2018-04-26T16:04:24
This product is great for mounting photos to backing board. It is pretty sticky, but you can separate your photo from the backing board if you misaligned it. You just have to go slow and be careful that you do not damage the photograph. I normally place a piece of the used 3M paper that I already got the glue off of and place it between my photo which already has the glue applied to its back and then align the photo with the backer board before i remove the paper and press down . It works great this way to get everything aligned before the glue takes hold. A great product which I use constantly. I don't know of anything better. Thanks Adorama for caring this product !
DAVID M.
2013-05-06T21:00:00
I use this to mount prints on mat board - it works great!
CAROL B.
2013-04-23T21:00:00
It does what it is ment to do and does it well. Easy to use if you take the time.
The G.
2009-02-20T19:00:00
Easy to use economical product. The best part is no heat is required.
Tom S.
2008-03-23T21:00:00
This material does an excellent job of mounting photos to Matt board. You really cant move it once it touches the print. Be careful not to get any of this material on the surface of the print.
William
Works as it says it will
By Tom S.
Easy to use economical product. The best part is no heat is required.
Great product
By ERIC P.
I have been using this product for several years and it is easy to use and does a great job!
A dry, synthetic, easy-to-use, pressure sensitive adhesive. Allows repositioning of artwork until bond is made permanent. Just unroll PMA adhesive side up, position artwork, and cut the PMA flush or leave a narrow border for trimming. Place the artwork face up on the release paper, protect with slip sheet and rub with a squeegee or roller to transfer adhesive to back of the artwork. Remove the liner and position the adhesive coated artwork on the mounting surface. Cover with a slip sheet and rub with squeegee or use the C-35 PMA applicator for a permanent bond.